2box forum: accident-free since the last one.

Main Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - edcito

2Box just published the list of new sounds in the drumit 3 compared to the 5:
Drumit 3 and 5 Card content now available directly from 2box-drums:
Lots of good stuff, finally up and running!
I remember 8 years ago when I got my first drumit 5 module, I had a beautiful Roland set with the pd-x pads and was so dissapointed that it was not possible to use them with the module, the rim-head separation wasn't there and ended up selling the roland pads and bought the 2box pads.

Now, 8 years after I just cannot say how satisfied I am with the drumit 3 and its compatibility with the roland pd-108, 128 series which have a much hotter rim hahaha, the LXTR is just magic and now I have clean separation between head and rim, trigger a loop on the rim and don't be afraid to trigger a spock cymbal assigned to the head. Works on the snare and toms, and even if you can't get it right on the toms it doesn't matter since you are going to split the input to use another cymbal or pad.

Huge selling point for 2box, I just wish they were more aggressive in the market, specially in the US, nobody knows them there...
I just discovered this guys: Gear Drum, they are from Italy and make triggers for pads and cymbals, they look nice, specially those triggered low volume cymbals:
After 2 weeks of owning the module I was wondering if the admin can add a drumit 3 Subsection to the forum?
That way we can keep both modules discussions separated.
So, I'm recording some midi from my drumit 3 into logic but when I see the notes in Logic they are completely different from the notes set in the module! For instance, the kick, which is set to C2 in the module, is being recorded as C1!! The Snare is F2 in the module but it show E2 in logic!
I didnt transpose anything in logic.
Also, dragging a midi groove from SD3 to trigger the internal sounds of the module trigger the wrong notes of course....
It's just baffling....
your music / Drumit 3 sounds on soundcloud
March 14, 2018, 10:40:18 AM
I've been putting some short recordings made on my drumit 3 with different kits, stock and from VST's. I"ll be uploading more in the future. If you want to check them out, here is the soundcloud link:
An updated version with support for the drumit 3 trigger types is up for download:
e-drum DIY / modifications / Drumit 3 SD Card Mod
March 08, 2018, 01:12:57 PM
I just opened my drumit 3 module following the same method as for the drumit 5, all was going good until I see the board is attached now to the top lid, and, bad news, the display seems to be glued to the plate! So if you lift the board it will damage the display!

link to pictures:!Apbbfhss1Va_gaUG8--Y6X2wrpstoA

You will see the SD Card is the same as the one in the drumit5.

So it seems this time 2box wont allow the sd card mod, we're screwed...
Other e-drum systems / Atv Adrums
September 07, 2017, 02:48:01 PM
As expensive as the drum-tec, but with better cymbals than roland, maybe a good pairing with the upcomig drumit 3?
Coming on the 12th of September. 230GB library samples, 5 times more as SD2, completely independent from SD2, it seems like a huge EZdrummer 2.
"Toontrack have done it again.

Almost 10 years ago, Toontrack released the now legendary Superior Drummer 2 which revolutionized the drum software market and quickly became an industry standard. Superior Drummer 3, available worldwide on September 12th, has been completely redesigned from the ground up and includes a host of innovative new features to take your virtual drumming experience to a whole new level.

We imagine you have lot’s of questions and hopefully you’ll find some answers below;

What is new in SD3?

Superior Drummer 3 introduces a huge list of new features but here are some highlights for you;

New and improved workflow
Core sound library of over 230 GB, that’s ten times more than Superior Drummer 2
xx number of kits
An additional eleven room microphones are included set up in a surround configuration
Drum audio to MIDI conversion
35 SD3 mixer effects
Scalable interface
Detachable windows
Extensive MIDI library
Pool of electronic drum sounds
Are Superior 2 and Superior 3 different instruments/products?

Yes. SD3 is a completely new software engine so when you install SD3 it will not remove or replace SD2, both will exist on your computer independently of each-other.

I already own Superior 2, is there an upgrade to Superior Drummer 3?

Yes. As a registered Superior Drummer 2 user you save 50% on Superior Drummer 3. You can pre-order the Superior Drummer 3 upgrade now via the Time+Space website.

What if I recently bought Superior Drummer 2? Do I have to pay the full upgrade price?

Yes. There is no cheaper upgrade price depending on when you purchased Superior Drummer 2, it’s the same for everyone.

How is the Superior Drummer upgrade delivered?

The upgrade will be delivered as a serial number via e-mail from September 12th. You will then be able to register and then download the software and SD3 content using the Toontrack Product Manager. If downloading the 230 GB of SD3 content is a problem then you can also purchase the core sound library pre-installed on a solid-state drive (SSD) here.

I currently own EZdrummer 2, is there a crossgrade option to Superior Drummer 3?

Yes. Registered EZdrummer 2 users qualify for a 25% discount on Superior Drummer 3. As with the upgrade, the crossgrade will be delivered as a serial number via e-mail from September 12th.

You can pre-order the Superior Drummer 3 crossgrade now via the Time+Space website.

Will the full Superior Drummer 3 be available as a download or on a hard drive?

Superior Drummer 3 will be available to download on September 12th. You can also pre-order the 230 GB core sound library pre-installed on a solid-state drive (SSD) and expect to ship these out for delivery before September 12th.

What are the minimum system requirements for Superior Drummer 3?


How big is Superior Drummer 3?

The SD3 core sound library is just over 230 GB.

Do I have to download it all at once?

No. The SD3 core sound library download will be split into five parts, each around 50 GB in size which can be downloaded separately using the Toontrack Product Manager after registration. The first part represents a ‘Lite’ installation which can be used without downloading the other four parts. You can download the additional parts in the future at your leisure.

My download speed is slow, what other options do I have to get Superior Drummer 3?

If downloading the SD3 core sound library is a problem for any reason then we would recommend purchasing the core sound library on a solid-state drive (SSD) which can be pre-ordered here.

If I pre-order Superior Drummer 3 when will I receive it? (respond with info on serial and SSD).

If you pre-order SD3 today, your serial number will be delivered via e-mail on September 12th.

I already have some SDX expansions, will they work in Superior Drummer 3?

Yes, once you have downloaded the free SDX updates which add SD3 compatibility which will also be available on September 12th, your SDXs will not only work but include GUI enhancements."
*Module is sold!*
The rest of my new black kit is now up for grabs:

  • 2box 14" Ride/Crash Cymbal with 2box rack clamp , 2box arm and stereo cable - 150EUR
  • 2box 12" Snare in black with snare stand and stereo cable- 150EUR
  • 3 x 2box 10" tom black pads with 2box rack clamp, l-arm and stereo cable 120 EUR ea.
  • 42Box Zourman hihat conversion Kit, 2 weeks old for 90EUR including shipping
Delivered in original boxes, prices include postage within Germany, other countries please enquire. Shipping worldwide

Still 4GB on board memory...
Based on the same technology as the DrumIt Five we have now added the Universal Trigger Interface
allowing the user to connect any kind of pad/trigger to the module*. The new DrumIt Three comply
with all popular major drum pad manufacturers’ pads, including cymbals and hi-hats.!!
Other e-drum systems / KAT KT3
January 20, 2016, 03:35:38 PM
Just wanted to show off my new toy, it's a kat KT3, all rubber and feels great. Using it with my mac to trigger SD2, no complaints there, response ist ok and the size of the pads is a relief compared to other manufacturers, the feel is like the pearl trutrac heads.

There's a post on farce book from 2box saying: "I spy with my little eye something ending with Three....... ‪#‎Musikmesse2015"

Maybe they are hinting at the 2box MKThree?
it's strange that no one has even reported about this, maybe some swedish reporter has but I have found no further info on this...
General 2box Drumit 5 forum / My DDT Natural 2Box
March 21, 2015, 09:32:29 AM
Put some new DDT Velocity 2ply heads and I'm happy as a bunny :patbat2box:

Sold on feebay