Author Topic: OS update available 1.34.10  (Read 540 times)

edcito

  • Sr. Member
  • ****
  • Posts: 421
  • Karma: 16
  • coming back to life...
    • View Profile
OS update available 1.34.10
« on: January 13, 2020, 02:39:11 PM »
From http://2box-drums.com/support/

OS 1.34.10 Jan 10 2020
This OS is compatible with DrumIt5 and DrumIt Three.
* If a Hihat Calibration  is performed the new calibration can now be saved in the UNIT file (Press UNIT-SAVE?).
* Fixed the issue with hihat opening value on kit change - now the opening value remains the same as stored in a KIT. (Finally!!!!)
* Added auto-set of decay value to "INF" in case a loop sound is selected for a channel.
* Cymbal choke is now active when a "HOLD" value is activated.
* A Crosstalk ( XTLK ) feature is added for Tom and Snare Channels to minimize crosstalk between Head and Rim.

welshsteve

  • Hero Member
  • *****
  • Posts: 539
  • Karma: 19
    • View Profile
Re: OS update available 1.34.10
« Reply #1 on: January 13, 2020, 02:40:15 PM »
Good news!!!

ANGR77

  • Sr. Member
  • ****
  • Posts: 490
  • Karma: 33
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: OS update available 1.34.10
« Reply #2 on: January 13, 2020, 08:02:11 PM »
It is great OS version! The xtalk function between head/rim is a very good improvement for the users that experienced problems in the previous version with the separation and ghost notes.

Best regards

Anders / www.zourman.com
Sonor Safari, Pearl Crystallite, Zourman Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, ATV hh, KT-10, 14C/13R/15R, MegaDRUM, 2Box 5 MK1&II & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com

Jman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1956
  • Karma: 122
  • D5 modules SN: 00197 and 02207 D3 module SN 00009
    • View Profile
    • Stealth Drums
Re: OS update available 1.34.10
« Reply #3 on: January 14, 2020, 09:10:00 PM »
This prolly applies to very few users .... but I did the OS update yesterday on my D3 and D5 modules. On the D3 I did the HH calibration and that went fine, showing DONE. But when I would move the pedal NOTHING happened .... So, just as a reminder: Because the New OS remembers your previous HH settings: I had been using my Aux HH on the D3 as a Fixed Hat with a certain degree of openness .... I had to go to where I had set it as Fixed and change that .... then everything worked as expected .... That stumped me for a little while ;D

I think the new Xtalk settings for Head/Rim articulations are better. I haven't done a lot of experimenting with it yet, but initially it seems to work better than the previous LXTR Xtalk settings.
« Last Edit: January 14, 2020, 09:12:56 PM by Jman »
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

ANGR77

  • Sr. Member
  • ****
  • Posts: 490
  • Karma: 33
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: OS update available 1.34.10
« Reply #4 on: January 14, 2020, 10:09:56 PM »
:-) The fixed hh pedal setting can really make you go bananas...seeking errors...

I think all settings are stored in each dkit file nowadays.

There is a manual up on the website for the new xtalk function:

http://2box-drums.com/wp-content/uploads/2020/01/Crosstalk-manual-for-OS-1.34.10.pdf

Best Regards

Anders / www.zourman.com
Sonor Safari, Pearl Crystallite, Zourman Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, ATV hh, KT-10, 14C/13R/15R, MegaDRUM, 2Box 5 MK1&II & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com

rush1234

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Re: OS update available 1.34.10
« Reply #5 on: January 16, 2020, 09:33:39 PM »
I have the jman conversion system with vh11 that works fantastic im still running the previous OS will I run in to problems  (new calibration) because it works fine now.   but I am thinking about a 2box trigit on ebay to have a acoustic snare conversion and for what I read in the new manual this could be good idee to have the new OS.

greetings

Frank

Jman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1956
  • Karma: 122
  • D5 modules SN: 00197 and 02207 D3 module SN 00009
    • View Profile
    • Stealth Drums
Re: OS update available 1.34.10
« Reply #6 on: January 17, 2020, 12:29:04 AM »
I have the jman conversion system with vh11 that works fantastic im still running the previous OS will I run in to problems  (new calibration) because it works fine now.   but I am thinking about a 2box trigit on ebay to have a acoustic snare conversion and for what I read in the new manual this could be good idee to have the new OS.

greetings

Frank
I did the OS update as stated above and tested with my 2Box HH stand conversion kit. It worked for both the D3 and D5 modules with no problem.
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

Nico

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: OS update available 1.34.10
« Reply #7 on: January 20, 2020, 08:07:34 PM »
It is great OS version! The xtalk function between head/rim is a very good improvement for the users that experienced problems in the previous version with the separation and ghost notes.

Best regards

Anders / www.zourman.com
Unfortunately not to me. I am only able to get perfect results on my 10 inch tom with the new xtalk function, 12 and 14 inch head frequently triggers the rim. I checked the manual to try different settings (LP/HP). Back to 1.32.4 gives no problems LXTR set vHigh.
Diamond drums with center piezo moved to the side (still mounted on the plastic disc) using drumtec design 2-ply mesh.

Jman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1956
  • Karma: 122
  • D5 modules SN: 00197 and 02207 D3 module SN 00009
    • View Profile
    • Stealth Drums
Re: OS update available 1.34.10
« Reply #8 on: January 20, 2020, 08:21:29 PM »
Unfortunately not to me. I am only able to get perfect results on my 10 inch tom with the new xtalk function, 12 and 14 inch head frequently triggers the rim. I checked the manual to try different settings (LP/HP). Back to 1.32.4 gives no problems LXTR set vHigh.
Diamond drums with center piezo moved to the side (still mounted on the plastic disc) using drumtec design 2-ply mesh.
Did you also try this?:
X-ADJ: Boosts the Trigger preference for the current sensor (Head/Rim) if X-TLK sound is triggered on
Head/Rim
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

Nico

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: OS update available 1.34.10
« Reply #9 on: January 20, 2020, 09:05:20 PM »
Did you also try this?:
X-ADJ: Boosts the Trigger preference for the current sensor (Head/Rim) if X-TLK sound is triggered on
Head/Rim
Hi, yes I played with these adjustments (to max 12db) on head and rim. I believe boosting the head would be required in case the unwanted rim sound is heard.

Nico

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
    • View Profile
Re: OS update available 1.34.10
« Reply #10 on: February 13, 2020, 03:58:30 PM »
Few weeks later OS1.36.1 already available but no improvement on x-talk head/rim. Keeping 1.32.4...

ANGR77

  • Sr. Member
  • ****
  • Posts: 490
  • Karma: 33
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: OS update available 1.34.10
« Reply #11 on: February 13, 2020, 11:22:19 PM »
There where a couple of bugs fixed in 1.36.1 and some kind of adoption to 2box OEM vendors...

Best regards

Anders / www.zourman.com
Sonor Safari, Pearl Crystallite, Zourman Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, ATV hh, KT-10, 14C/13R/15R, MegaDRUM, 2Box 5 MK1&II & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com