Author Topic: Hihat with other brand cymbals  (Read 96272 times)

Manfred

  • Sr. Member
  • ****
  • Posts: 287
  • Karma: 30
    • View Profile
Re: Hihat with other brand cymbals
« Reply #105 on: December 04, 2011, 07:29:44 PM »

Hi again,

meanwhile i found a good way to solder the sensor chip. So if somebody is still interested just send me a PM. I have a couple of boards ready now (soldered, cleaned, tested).

Regards, Manfred

SHwoKing

  • Guest
Re: Hihat with other brand cymbals
« Reply #106 on: December 04, 2011, 07:56:20 PM »
This is good news Manfred, thank you for taking the time to do such thing.

PM sent  ;D

This box coupled with Jman's A to E Hi Hat kit should seal the deal !
« Last Edit: December 04, 2011, 08:03:43 PM by SHwoKing »

Slap the drummer

  • Guest
Re: Hihat with other brand cymbals
« Reply #107 on: December 05, 2011, 11:51:02 AM »
Many thanks Manfred  :)

Slap the drummer

  • Guest
Re: Hihat with other brand cymbals
« Reply #108 on: December 23, 2011, 06:09:55 PM »
Well I got my hihat boards from Manfred now.....

WOW!  they look fantastic, I'm amazed somebody can make something like that without
being a factory !

 :drum3:

BURNIN AMBITION

  • Hero Member
  • *****
  • Posts: 839
  • Karma: 21
  • 2-Box S/N 2167
    • View Profile
    • iola 11
Re: Hihat with other brand cymbals
« Reply #109 on: December 25, 2011, 04:17:25 AM »
This is good news Manfred, thank you for taking the time to do such thing.

PM sent  ;D

This box coupled with Jman's A to E Hi Hat kit should seal the deal !
tell me more about this hi hat maaaaannnnn
i was thinking of getting the cy-5. is this hi hat better?

SHwoKing

  • Guest
Re: Hihat with other brand cymbals
« Reply #110 on: December 25, 2011, 05:49:39 PM »
The kit Jman sells is not cymbals ot Hi Hats (well for me that was some cymbals but this is another story  ;D).

The Hi Hat kit consist of a two clear dampening sheet, a trigger assembly, a small rubber ring (scpacer) for cable path, mounting screws and nuts.
Jman also gives you instructions to install the kit properly.

For a more detailed insight, I suggest you to read an article on Digital Drummer starting on page 43
http://issuu.com/digitaldrummer/docs/digtaldrummer_april2010

You can also visit Jman website :  http://stealthdrums.com/Purchase.html

To sum this up, the kit allows you to use any acoustic cymbals or Hi-Hats as E-cymbals/E-Hi hat.. And Jman is the first one to provide a cymbal kit dedicated for 2box with 3 zones and choke.

For Hi-Hat, this is another story as any cymbal will work as long as you use Manfred's board but you already have one.

For me now, i have yet to get a 2box module in february and will start mounting the Hi Hat kit during the same period.

Slap the drummer should be able to tell what he thinks about it soon as I read he bought some kits to Jman as well.
« Last Edit: December 25, 2011, 05:54:01 PM by SHwoKing »

BURNIN AMBITION

  • Hero Member
  • *****
  • Posts: 839
  • Karma: 21
  • 2-Box S/N 2167
    • View Profile
    • iola 11
Re: Hihat with other brand cymbals
« Reply #111 on: December 25, 2011, 06:56:10 PM »
i see. i thought they were electronic hi hats. they look amazing but for me noise is af utter importance...

eyerichards

  • Guest
Re: Hihat with other brand cymbals
« Reply #112 on: December 27, 2011, 03:05:56 AM »
Hi guys, merry Xmas for the other day. For those of you who own ddrum4 kits, I can happily report that used in conjunction with Manfreds sensor board the ddrum 4 hi hat pad works brilliantly  :rock: I've only tested it for 15 minutes but already it will be my main gigging hat and I'll keep the 2 box hat for practice at home as it's quieter.

roel

  • Hero Member
  • *****
  • Posts: 685
  • Karma: 9
    • View Profile
Re: Hihat with other brand cymbals
« Reply #113 on: December 30, 2011, 08:14:01 PM »
soon I will get my new DW 5000 2LEG Hihatstand!

phaynes

  • Guest
Re: Hihat with other brand cymbals
« Reply #114 on: January 22, 2012, 05:49:49 PM »
Hi Manfred.

I just sent you a PM but it is not showing in my 'sent messages'? please let me know if you did not receive and I will re-send.

codswallop

  • Guest
Re: Hihat with other brand cymbals
« Reply #115 on: January 22, 2012, 07:18:14 PM »
I would like to buy 1 please, i have Paypal. What's the cost? you have email? instructions are with it?

codswallop

  • Guest
Re: Hihat with other brand cymbals
« Reply #116 on: January 23, 2012, 11:25:27 PM »
Where did he go?

Must have dreamt it  :)

Yes if you see this and have the goods then i have the funds. :animal:


Jman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1946
  • Karma: 120
  • D5 modules SN: 00197 and 02207 D3 module SN 00009
    • View Profile
    • Stealth Drums
Re: Hihat with other brand cymbals
« Reply #117 on: January 24, 2012, 02:43:13 AM »
Where did he go?

Must have dreamt it  :)

Yes if you see this and have the goods then i have the funds. :animal:
I know when I was talking about SD card specs with Manfred earlier in the month, he had a very busy schedule .... and travelling I believe. This Hi Hat controller is more of a nice favor he has been doing for us, definitely not a money making enterprise ... so, you'll prolly have to have some patience .... J
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

codswallop

  • Guest
Re: Hihat with other brand cymbals
« Reply #118 on: January 24, 2012, 10:02:12 AM »
Patience, wow i even tell the microwave to hurry up  :)

Seriously, yes of course i can wait.

I'm using the 2 box hi hat pad on a regular stand (now i figured how the thing tightens up, doh!)

Jman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1946
  • Karma: 120
  • D5 modules SN: 00197 and 02207 D3 module SN 00009
    • View Profile
    • Stealth Drums
Re: Hihat with other brand cymbals
« Reply #119 on: January 24, 2012, 04:27:56 PM »
Patience, wow i even tell the microwave to hurry up  :)

Seriously, yes of course i can wait.

I'm using the 2 box hi hat pad on a regular stand (now i figured how the thing tightens up, doh!)
If you haven't done this ... send Manfred a Personal Msg. letting him know what you want ... that is probably easier for him to follow than in this thread ....  J
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/