help with Roland config and Drumit 3

[HittinStix]

Hey all.

Just wanting some advice on rim and bell triggers on the following config and to make sure i have to pad types right. im using the 2 trs into cymbal 2 and 2b for the ride/ride bell
 and the crashes both have a single trs into cymbal 1 and cymbal 3. having issues trying to trigger both rims and bell sounds


V-Pad (Snare): PD-105BK x 1                      PadPP
V-Pad (Tom 1, Tom 2, Tom 3): PD-85BK x 3         PadPP
V-Hi-Hat: VH-11 x 1                              raw 799-912   pof 186
V-Cymbal Ride: CY-13R x 1Cy                      CyPSB
V-Cymbal Crash: CY-12C x 1                       Cypss                                         
V-Cymbal Crash  CY-8 x1                          CyPs
Kick Pad: KD-9 x 1                               kick 1


Thanks in advance for any help here..

[ANGR77]

Hi! Late reply: :-)

The 12C is not right - it is a PS trigger (only 2 zones with piezo/switch).

In general for rim triggers - you have their settings by pressing "more" and press the button for the actual pad you want to edit the rims on. You can try to set the sens a bit higher etc...

Best regards

Anders / Zourman.com