Author Topic: Sound comes later after hitting the drum's head  (Read 804 times)

Dkarl

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Sound comes later after hitting the drum's head
« on: May 15, 2022, 07:19:21 PM »
Hi all,
This is all in the title... When hitting the drum's head (original mesh heads from the speedlight kit) the sound will play later after the stick touches the mesh, kind of a double stroke latency... very troublesome...
Any chance someone get ride of such a situation ?

DKarl

halftime

  • Jr. Member
  • **
  • Posts: 66
  • Karma: 4
    • View Profile
Re: Sound comes later after hitting the drum's head
« Reply #1 on: May 17, 2022, 11:36:13 AM »
If this is happening with the preset kits, your module might have a bad SD card. You could contact 2box support to see if they send you a replacement, or you can just buy a new A1 or A2 class card and copy the contents from the original card. Changing the card requires opening up the module. You can find instructions for that on this forum. While you're at it, you can also install an extension cable for the card so that you don't have to open the module afterwards if you need to change the card again later.

Dkarl

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: Sound comes later after hitting the drum's head
« Reply #2 on: May 18, 2022, 08:11:08 PM »
Hi Halftime, thank you for your good advice, I'm going to purchase a new SD card. I Will update the results later after new installation.
DKarl