Author Topic: Midi out from Roland to midi in Hi Hat issue  (Read 174 times)

SivanCarm

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
Midi out from Roland to midi in Hi Hat issue
« on: April 14, 2021, 02:22:27 AM »
I’m running a Roland TD-15( to use all my roland stuff)- and the midi out goes to midi in on the 2box. Everything is great, besides the hi hat- I can get only note#45 and 46- it’s never fully closed- just slightly, then half then open. What am I missing here?

ANGR77

  • Hero Member
  • *****
  • Posts: 622
  • Karma: 46
  • 2Box DrumIt Five MKI, MKII and Three owner
    • View Profile
    • Zourman.com
Re: Midi out from Roland to midi in Hi Hat issue
« Reply #1 on: April 14, 2021, 04:33:35 AM »
Hi! Even if going over midi the hi-hat on 2box still needs to be calibrated...because the midi adjusts the internal hihat engine. I also have to check about the last midi note on the hihat - if it was addressable over midi...there were something special here...

Best regards

Anders / www.Zourman.com
Sonor Safari, Pearl Crystalbeat, Zourman Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, ATV hh, KT-10, 14C/13R/15R, PCY-155, MD, 2Box 5 MK1&II & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.14, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.co