Author Topic: 2box Drumit Five Hi-Hat calibration  (Read 123 times)

fishyy69

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
2box Drumit Five Hi-Hat calibration
« on: January 11, 2021, 05:16:10 PM »
Hey!
I got me a used 2box Drumit Five yesterday. Every pad works just fine, but i can't manage to calibrate the Hi-Hat correctly.
I tried very small to big opening distances, but everytime i finish the calibration, the module says "NoChg" instead of "Done".
I will try to factory reset the module and re-download all sounds, maybe that will help.
If it doesn't, do you know any fix for my problem?

welshsteve

  • Hero Member
  • *****
  • Posts: 588
  • Karma: 21
    • View Profile
Re: 2box Drumit Five Hi-Hat calibration
« Reply #1 on: January 12, 2021, 08:24:35 PM »
You definitely using a working TRS cable? It's worth asking.

Stoked2

  • Jr. Member
  • **
  • Posts: 91
  • Karma: 1
    • View Profile
Re: 2box Drumit Five Hi-Hat calibration
« Reply #2 on: January 12, 2021, 09:45:43 PM »
Just to touch all the bases. , a couple of questions. One , are you unlocking your hi hat with the wing nut?  Secondly, are you depressing the hi hat pedal all the way down first and then slowly bring it a to a position that will work then hit the button twice. To get the module to read done. I have struggled withus myself . I dont think there is anything wrong with your module . also maje sure your hi hat cables are all the way in . You can even unplug and replug with the module on or off and try again!

ANGR77

  • Hero Member
  • *****
  • Posts: 583
  • Karma: 37
  • 2Box DrumIt Five MKI, MKII and Three owner
    • View Profile
    • Zourman.com
Re: 2box Drumit Five Hi-Hat calibration
« Reply #3 on: January 13, 2021, 07:36:27 PM »
A trick when trying to wake up the calibration on an old DrumIt Fives hi-hat...is to do the opposite...when calibrating. E.g When it is supposed to be in closed mode and your are about to press the calibration button...you open the hit-hat instead...and press the button. And continue to close the hi-hat when it indicates calibration for the open state. If you try this and have working cables, mounted magnet below and the hi-hat pad and still gets “no change”...the hi-hat pedal circuit could be faulty.

Best regards

Anders / www.Zourman.com
Sonor Safari, Pearl Crystalbeat, Zourman Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, ATV hh, KT-10, 14C/13R/15R, PCY-155, MD, 2Box 5 MK1&II & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.14, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.co

Soundmodul

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Re: 2box Drumit Five Hi-Hat calibration
« Reply #4 on: January 14, 2021, 04:23:20 PM »

I had the same problem with the hi-hat.  I found the problem to be on a small circuit board below the cymbaL I send e-mail the 2box team and asked where can I buy a new circuit board? The responsibility came the same day:

””Hi,
We can ship a new one from Sweden.
Price is 19:90€  including freight.
Pay to PayPal invoice@2box.se
Regards
Team2box””
 The post office delivered the letter in five days. I changed the part and now it works fine!
Great service!
(Sorry for the bad English but luckily there is a Google translator!)