Author Topic: Incorrect Triggering During Live Performance  (Read 587 times)

VktoriusWarrior

  • Newbie
  • *
  • Posts: 13
  • Karma: 2
    • View Profile
Incorrect Triggering During Live Performance
« on: October 21, 2019, 05:56:49 PM »
Hi there guys,

I use a Drumit 3 module on Roland TD-25 hardware. I use it to play in a cover band. I've had the module for a year and half now.

Sometimes when I am playing live, I experience weird triggering (especially with the snare). One particular venue has a 'floating' stage. I feel like it might be the small movements of the stage that are screwing me up.

I will hit the snare, but the sound might be on time or late. It makes me sound like I'm playing like crap.

I have fiddled a little with the 'mask' setting a little bit when I was playing live. I think it might have helped a bit. But I didn't want to get too deep into playing with settings while in a live setting. On the other hand, I will only experience the problem when I'm playing live. I don't run into the problem when practicing.

I have also suspected the deep frequencies of our sub woofer or the bass player's amp being too close to my set and they are triggering some of the pads.

Has anybody else experienced something like this?

welshsteve

  • Hero Member
  • *****
  • Posts: 511
  • Karma: 15
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #1 on: October 22, 2019, 10:14:18 PM »
I know this problem. Let me guess, at home it's not apparent but in a bassy environment it's noticeable?

larsoes

  • Newbie
  • *
  • Posts: 11
  • Karma: 0
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #2 on: October 23, 2019, 11:44:15 AM »
You should contact 2box via messenger, maybe it's a hardware problem. I had my memorycard shifted due to lacking sounds.

Digs

  • Newbie
  • *
  • Posts: 36
  • Karma: 2
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #3 on: October 30, 2019, 07:40:33 AM »
How’d you get round this Steve?

welshsteve

  • Hero Member
  • *****
  • Posts: 511
  • Karma: 15
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #4 on: October 30, 2019, 01:48:55 PM »
A few things:

Avoid being next to the bassist/bass speaker, not always possible on small stages.
2 two modules. I found that the continuous hihat data coupled with bassy environments made it more noticeable. So, trading off the hihat to another module (I used a TD15 for a while then a 2nd Di3) or having say decent low volume hats, like the Aegean or something.

Nothing else I tried worked.

Digs

  • Newbie
  • *
  • Posts: 36
  • Karma: 2
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #5 on: November 01, 2019, 11:13:32 AM »
Thanks mate

VktoriusWarrior

  • Newbie
  • *
  • Posts: 13
  • Karma: 2
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #6 on: November 07, 2019, 04:00:43 PM »
Thanks for the replies everyone. I have contacted 2box support and I will see what they say.

That is an interesting idea Steve to use a second module. Very interesting. I might give that a go. I might even use the second module for the ride cymbal in addition to the hats. I found I would mostly get this problem when I would use the ride cymbal (more than the hi-hat really).

My last show started off HORRIBLE because of this problem. We moved the bass amp away as best we could and I had to crank the 'mask' setting to maximum on all the pads. That worked (somewhat), but the snare was utterly horrible and non-responsive when the mask setting was cranked like that.

So that's not the complete answer either. Depending on what 2box comes back with I really might have to try 2 different modules. Not ideal, but I'm getting desperate now.

ANGR77

  • Sr. Member
  • ****
  • Posts: 467
  • Karma: 32
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: Incorrect Triggering During Live Performance
« Reply #7 on: November 09, 2019, 10:29:28 AM »
Hi!

I had a similar problem some years ago on stage...my feeling was that this came from a wrong set trigger type on one of the cymbals. It was set to PADPP instead of CYPS by accident. This seemed to fool the whole module ending up with delayed snare hits etc as you described. So try to check your settings for all drums.

Best regards

Anders / www.zourman.com
Sonor Safari, Pearl Crystallite, Zourman Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, ATV hh, KT-10, 14C/13R/15R, MegaDRUM, 2Box 5 & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com

VktoriusWarrior

  • Newbie
  • *
  • Posts: 13
  • Karma: 2
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #8 on: November 12, 2019, 02:48:24 PM »
So try to check your settings for all drums.

Good suggestion. Thank you sir!

welshsteve

  • Hero Member
  • *****
  • Posts: 511
  • Karma: 15
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #9 on: November 17, 2019, 02:27:49 AM »

That is an interesting idea Steve to use a second module. Very interesting. I might give that a go. I might even use the second module for the ride cymbal in addition to the hats. I found I would mostly get this problem when I would use the ride cymbal (more than the hi-hat really).

I totally recommend the 2 module set up. Especially if you at some point plan to expand the set up past the standard 1 kick, snare, 4 toms, 3 cymbals and hihat set up. It'll also give you options to have at least 8 outputs too!

VktoriusWarrior

  • Newbie
  • *
  • Posts: 13
  • Karma: 2
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #10 on: November 19, 2019, 02:43:07 PM »
I totally recommend the 2 module set up.

Thank you Steve! I've taken the leap to start down this path. I am finding it a little freeing to be honest. For starters, I could never quite get the 2box module to treat my VH-11 hi-hats properly (even with all the guides out there). I had them at 85% - 90% where I liked them, but could never quite get it to 100%.

Now I don't have to worry about that. The native Roland module is most likely going to work best with Roland hardware.

My only slight concern is going to be the extra added weight when I am moving this set around. I usually use it at gigs once a month or so.

I haven't tried to move it yet, but when you add in the weight of the 2nd module, a mount for it, and the cabling...I think it's going to add up.

Oh well. Chances are it will still be a small price to pay to avoid this very bothersome issue.  :)

welshsteve

  • Hero Member
  • *****
  • Posts: 511
  • Karma: 15
    • View Profile
Re: Incorrect Triggering During Live Performance
« Reply #11 on: November 22, 2019, 12:40:54 AM »
The extra module (whether it was a TD15 or the second di3) was only extra in terms of time to set up. That's unpacking, mounting, powering up and plugging in whatever pads. Now, if you think of it in time, it was never even 5 extra minutes.
I didn't use a VH11, I have a jobeky brass with a goedrum controller. It was okay with a td15 and okay with a di3. A mate of mine has a Vh11 which I tried with a Di3 and I much preferred it! Over I prefer the di3 due to the much bigger choice of hihat sounds