News:

2box forum: accident-free since the last one.

Main Menu

Top software features that you would like added?

Started by Scottie, February 08, 2010, 11:44:07 AM

Previous topic - Next topic

add support for playing with brushes?

Yes! Can't live without it!
46 (29.1%)
No - other features are more important
80 (50.6%)
I don't care - what is this "jazz" thing anyway?
13 (8.2%)
Give Puttenvr a light for his kick drum
19 (12%)

Total Members Voted: 26

jeroen

The dynstart function,like the ddrum 3 have would be very nice.
Gr jeroen
(sorry for my bad English) :patbat2box:

BURNIN AMBITION

hello guys. id really like to see in the buil in metronome, the ability to play all beeps in each bar, with the same loudness. not just having the firstbeep louder than the others. also id like more sounds for beeps. generally, the metronome should be upgraded to be a bit better in general.
also id like the limitation for 100 kits, removed!!!
2box, bengt, deve, digital drummer, Jman, Brian, Manfred thanx for everything

iola 11
http://www.facebook.com/iola11
www.reverbnation.com/iola11
https://soundcloud.com/iola11
https://twitter.com/iola11band
www.youtube.com/iola11band
www.myspace.com/iola11

snydley

Quote from: BURNIN AMBITION on April 06, 2011, 06:38:53 AM
hello guys. id really like to see in the buil in metronome, the ability to play all beeps in each bar, with the same loudness. not just having the firstbeep louder than the others. also id like more sounds for beeps. generally, the metronome should be upgraded to be a bit better in general.
also id like the limitation for 100 kits, removed!!!
Thumbs up to both of those, especially #2 :rock:
Snyde

edtc

hello

In UNIT/MIXER mode , could it be possible to have the push function of the encoders mapped to "fader toggle" ... so we could change the line vertically , and change volume with the same button ... it could be individual for each 3 mixers lines ...

actually we have to press the middle upper button called "FADER" to toggle between lines and set group volumes ...

having the toggle command and the volume on the same encoder seems more fast and intuitive to me...

...what is your point of view ?

BURNIN AMBITION

a useful thing that i would like to be added, is this.
the ability to change midi notes from a specific kit. and not apply the changed midi notes to all kits at once. this is very useful and would be awesome to see in future versions of the firmware. thanx
2box, bengt, deve, digital drummer, Jman, Brian, Manfred thanx for everything

iola 11
http://www.facebook.com/iola11
www.reverbnation.com/iola11
https://soundcloud.com/iola11
https://twitter.com/iola11band
www.youtube.com/iola11band
www.myspace.com/iola11

Talk Show Host

I'd like velocity settings to be saved with each kit as opposed to the current global settings.
Thanks.

Manfred


Hello,

i have one more small request regarding the display on the UNIT-TRIG page. To display the velocity one can choose between a horizontal bargraph for single hits or vertical bargraphs for multiple hits currently. I would like to have a third setting where the velocity is displayed in numbers from 0-127. This would help me a lot in setting up the gain and threshold parameters.

Regards, Manfred

hwasser

Just want the ride-zones and the choke over midi fixed.

This is how the cymbal och choke notes get recorded from 2box when  splashing the cymbals hard:

Cymbal - |
Choke  -  |

BURNIN AMBITION

another awesome thing for us thaore too many drumless tracks in brain! could we have navigion so that we dont see all the tracks in one place but to see the tracks in each folder we created. if we had lets say 200 tracks it would beannoying to turn the knob all the time to find the tracks we want. but if we had folder navigation it would be easier

oh and a louder metronome would be great
2box, bengt, deve, digital drummer, Jman, Brian, Manfred thanx for everything

iola 11
http://www.facebook.com/iola11
www.reverbnation.com/iola11
https://soundcloud.com/iola11
https://twitter.com/iola11band
www.youtube.com/iola11band
www.myspace.com/iola11

buntstudios

Is it possible to have different outputs assigned to different kits? So for example - in the 2box editor I copied and made 2 identical kits. Then in the 2box module, go to kit 1 and assign everything to different outputs, utilizing the 8 outputs for RECORDING and then on kit 2, have everything assigned to outputs 1 and 2 for playing live with a PA and all I'd have to do is pull out the 1/4" of channel outs 1 and 2 and put in the 1/4" cables going to the PA.

Sorry if that doesn't make sense.

If that can be done, please teach me! Otherwise that would be a sweet update in my opinion because for recording i need to use the 8 outputs, but for just playing around on the kit, I'd like to just set a left and a right to the PA as I don't need 8 channels being sent to the PA when I'm just practicing.

Thanks

Will

eyerichards

adding to the wish list, I would like to see individual eq for all the outputs  :)

edtc

Quote from: Deve Loper on November 09, 2011, 11:58:05 PM
Hi.
Just a little notice that a new OS version is on the way with increased phones level.
I'll check the wishlist and see what else I can throw in.
Regards,
Deve.
ps. This month, really.

hi !

Good news this OS update ...

is it possibe to add the possibility to internaly "MIDI trig " any pad sound via another pad input ?

  For example to trig a kick or the ride's bell (or any zone...) using a tom rim or a perc input , without the need to reassign the sounds for all kits...

For bell freaks , this could be a way to be 100% sure to trig this damn PING! 

And for me an easier way to assign the same kick sound to a pad  in any kit i chose or build .... ( i allready do that using an ALESIS TRIGGER I/O plugged to the DRUMIT in , but it adds 6ms latency via midi ... doing this internally would be far better ....)

by the way , it would be nice too to have the option to assign a different sound for some kits ...



Is there some latency optimization planned for future releases ? 



   Is it planned to have more than one UNIT PRESET ....?  for different playing style ( GIG VS night practice ) , different pad setups or diferent sticks....  not factory presets , but just 10 user customisable presets ...


    At last ,  do you plan to add the possibility to MIDI sync the module from a computer ?    it could be usefull if you use the module with a DAW , so you can use the internal click and internal delay in sync with the music ....

 

Thanx for your hard work ...


PS  ... long time ago i ve read that the drumit 5 will have REX files support in the future .... any news on this ? ( maybe i dreamed that... ;) )



AA_

QuoteIs it planned to have more than one UNIT PRESET ....?  for different playing style ( GIG VS night practice ) , different pad setups or diferent sticks....  not factory presets , but just 10 user customisable presets ...

"When holding down the KIT button at startup, one can choose which kit bank file to open. Press PREV or NEXT to select a dkit file, then press OPEN. By default the DrumIt.dkit file is opened." (1.20 Features Manual)

edtc

Quote from: AA_ on November 11, 2011, 12:12:32 AM
"When holding down the KIT button at startup, one can choose which kit bank file to open. Press PREV or NEXT to select a dkit file, then press OPEN. By default the DrumIt.dkit file is opened." (1.20 Features Manual)

Thanx for the "trick" :) that can be usefull....

But i still think it could be easier to change those settings in the same "session" without the need to restart the module ... Also , if you change something in one KIT , those changes wont appear in the other DKITs and that can be confusing ...




AA_

Quote from: edtc on November 11, 2011, 11:29:21 AM
(...) Also , if you change something in one KIT , those changes wont appear in the other DKITs and that can be confusing ...

and what about single kits? :D