What output cable should i use

[Dashriprock]

I want to run 1/4 inch cables from the module outputs to my audio interface then run from the interface 1/4 inch again to my monitors.I want stereo, do i use balanced or unbalanced cables,right now my 1/4 cables have 2 rings ,but i think they should only have one ring (mono).Bit confused

[Jman]

I want to run 1/4 inch cables from the module outputs to my audio interface then run from the interface 1/4 inch again to my monitors.I want stereo, do i use balanced or unbalanced cables,right now my 1/4 cables have 2 rings ,but i think they should only have one ring (mono).Bit confused

The Outs are Mono T/S. Except Headphone which is Stereo TRS. But you should be fine using Stereo TRS Cables. I'm not sure how many Outs you plan to run from your module to your interface. There are lots of choices. Here is one thread discussing the Outputs with a discussion about using TRS or TS cables from post 8 on: http://www.2box-forum.com/index.php/topic,2578.0.html

[Dashriprock]

Thank you