News:

2box forum: accident-free since the last one.

Main Menu

Factory reset

Started by InTheBox, November 20, 2014, 08:08:12 PM

Previous topic - Next topic

InTheBox

Just got my second hand 2BOX mk1 set up and in the process of trying it out.

The previous owner has of course tweaked the kit a bit. I'm thinking the best thing for me would be to start with a clean slate so to speak, and I'm wondering if there's a way of doing a factory reset of the unit?

Also, is there any difference between a ride and crash cymbals? The kit came with 3 cymbals and they all look the same.

Cheers

Drum2

Crash or ride is in the box, not in the "cymbal" with 2Box.

You will find A lot of information on the 2Box website, including the latest OS and manual:

http://2box.se/US/pages/downloads/

Have Fun :drum2:

teletom007

2box cymbal only one type. crash and ride is the same. Top black, button orange.

tom

Jman

#3
Quote from: InTheBox on November 20, 2014, 08:08:12 PM
Just got my second hand 2BOX mk1 set up and in the process of trying it out.

The previous owner has of course tweaked the kit a bit. I'm thinking the best thing for me would be to start with a clean slate so to speak, and I'm wondering if there's a way of doing a factory reset of the unit?

Also, is there any difference between a ride and crash cymbals? The kit came with 3 cymbals and they all look the same.

Cheers
There is a way to do a reset, but with an older module like that it may not be such a great idea, because you don't know if the previous owner deleted files. If they did, when you do a reset you will end up with ? instead of a sound on kits that have had files deleted. Before doing a factory reset I would check with the original owner to see if he has deleted or changed the sound files.

What might be a better option is to download the entire 2Box soundset here: http://www.hyperactive.de/support/2box
Delete the existing sound folders in the 2Box module and install the latest linked above.

Then download and install the new VS 1.30 OS and VS 1.30 Unit settings from here: http://www.2box.se/US/pages/os-update/

If you replace everything in the module like that you will be starting with a module that is setup just like the new ones.

As I say though check with the original owner to see, he may have the latest installed already.

As mentioned above there are also new additional sounds, kits, etc. available for download at the 2Box website:
http://www.2box.se/World/pages/downloads/
And the latest user manual here: http://www.2box.se/download/pdf/DrumIt_Five_Manual_1_2x_eng.pdf
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

Jman

#4
But in case you do decide just to reset the module (like I say a roll of the dice when you don't know the module history). Push Unit, page down till you get to the page with INIT. This is from the newest user manual:

INITï,¯ This function resets the DrumIt-Five-Module to factory default. Rotate the DATA
controller to select the part you want to reset. After selecting the desired value, press
the DATA controller â†".
There are various options available.
Unit resets all settings of the mode UNIT
Kit1 bis 100 only resets the settings of the selected KIT
KtPrg resets the order of the KITs to factory default
All resets all KITs and the order of the KITs to factory default
If you have completed the process successfully, Done appears on
the display. If NoChg appears, the system has not made any
changes.
Module Reset
To restore the factory default settings of your module, you can use the function INIT (see
above). You can also download a new DrumIt.dkit bank file from our website and overwrite
the existing file on your module with it. Please note that a complete init or loading a new
DrumIt.dkt files also corresponds to factory default sounds. If you have deleted sounds a “?”
will appear under FILE for that channel in the Kit.
Sounds can be downloaded from
http://www.hyperactive.de/support/2box
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

InTheBox

Thanks Jman for your help.

I think I'll go with the full re-install of the unit. I think the previous owner must have deleted some files, because on some kits there are sometimes only one or two sounds played.

LGM

Hello !

I've recently bought a second hand 2box module and wish to restore it to factory defaults.
Actually, I *did* restore defaults, but now I miss some sounds (removed by previous owner).
(My aging TD12 keeps a copy of OEM sounds somewhere, I thought the 2box would too .. but I understand this would require a bigger inboard memory ..)

Anyways, I'm downloading the zip from the above link right now but the site says these sounds are for 1.26 firmware. Will it work fine with my module which was upgraded to 1.30 ?

Thanks !

Jman

Quote from: LGM on January 26, 2016, 12:41:52 PM
Hello !

I've recently bought a second hand 2box module and wish to restore it to factory defaults.
Actually, I *did* restore defaults, but now I miss some sounds (removed by previous owner).
(My aging TD12 keeps a copy of OEM sounds somewhere, I thought the 2box would too .. but I understand this would require a bigger inboard memory ..)

Anyways, I'm downloading the zip from the above link right now but the site says these sounds are for 1.26 firmware. Will it work fine with my module which was upgraded to 1.30 ?

Thanks !
The sound set on the site is the latest and didn't change on OS 1.30. So you're good to go.
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

LGM

Quote from: Jman on January 26, 2016, 04:00:56 PM
The sound set on the site is the latest and didn't change on OS 1.30. So you're good to go.

Good news !
Thanks a lot.

InTheBox

Funny to see this thread bumped back up. This was one of my first entries here. How little I knew..  :P

roel

http://www.hyperactive.de/support/2box

On this link moduleinhalt 1.26 does not work anymore, can anyone post a working link/ download link for this thank you.

greetings,
Roel.


Jman

Quote from: roel on June 09, 2016, 06:51:24 PM
http://www.hyperactive.de/support/2box

On this link moduleinhalt 1.26 does not work anymore, can anyone post a working link/ download link for this thank you.

greetings,
Roel.
The 1.26 Module content is still up. The full module content is now under the 1.26 firmware link: Brain Betriebssystem 1.26  http://www.hyperactive.de/sites/default/files/Downloads/2box/DrumIt126.zip

After downloading the password is still: 2box  to unzip.
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

roel

Quote from: Jman on June 09, 2016, 08:54:25 PM
The 1.26 Module content is still up. The full module content is now under the 1.26 firmware link: Brain Betriebssystem 1.26  http://www.hyperactive.de/sites/default/files/Downloads/2box/DrumIt126.zip

After downloading the password is still: 2box  to unzip.

Thanx Jerry 👍

CrsMyHrt

Hey guys, need this file too but the password dont work. Anyone can help ?

Thanks.


JRage

Quote from: CrsMyHrt on January 09, 2017, 07:35:34 AM
Hey guys, need this file too but the password dont work. Anyone can help ?

Thanks.

Hi,
Try different software for unzipping. I had the same problem  ;)

BR,
JRage
Posted by some mistake.