Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ANGR77

Pages: 1 2 [3] 4 5 ... 42
31
Has it been working...from the beginning?

Jman’s design includes reed switches...where the choke should trigger when squeezing the edge reed.

Best regards

Anders / www.Zourman.com

32
General 2box Drumit 5 forum / Re: DrumIt5 MKII with 64gb Cards
« on: January 23, 2021, 02:40:55 PM »
I get the feeling that these bigger cards seems to be more forgiving and less sensitive for the latency problems, glitches and hiccups. My 64 Gb cards seems to work fantastic.

Best regards

Anders / www.Zourman.com

34
Is it the same regardless which hihat sound you use?

It is a bit hard to guess the problem by just reading about it...maybe video could be useful what you experience? Normally if you have made calibration between closed an open...the rest of the sounds in between will follow in a smooth way.

Best regards

Anders / www.Zourman.com

35
This is a great new version! :-)

Jman’s old idea, how to create an extra tight hi-hat layer in 2box...got solved within a mouse click in the new version! (It was quite complex to do it manually earlier)

And there are more goodies! Just to upgrade or buy!! Your best tool for 2box!

Big thanks Lustark!

Best regards

Anders / www.Zourman.com

36
General 2box Drumit 5 forum / Re: 2box Drumit Five Hi-Hat calibration
« on: January 13, 2021, 07:36:27 PM »
A trick when trying to wake up the calibration on an old DrumIt Fives hi-hat...is to do the opposite...when calibrating. E.g When it is supposed to be in closed mode and your are about to press the calibration button...you open the hit-hat instead...and press the button. And continue to close the hi-hat when it indicates calibration for the open state. If you try this and have working cables, mounted magnet below and the hi-hat pad and still gets “no change”...the hi-hat pedal circuit could be faulty.

Best regards

Anders / www.Zourman.com

37
General 2box Drumit 5 forum / Re: DrumIt5 MKII with 64gb Cards
« on: January 13, 2021, 07:28:38 PM »
I followed the instructions and now I have a working 64 SD Card in my drumit 3, it's the Sandisk Extreme...

Hmm, did the card You copied also show latency issues? To find the right card is maybe still an issue even if moving to 64GB.  My Sandisk Ultra 100 mb/s SD card with 50 cm extender cable seems to work fine...and has done it for a week or so...

Anders / www.Zourman.com

38
General 2box Drumit 5 forum / Re: DrumIt5 MKII with 64gb Cards
« on: January 09, 2021, 01:52:03 PM »
I tried my 64 GB with a extension cable (50 cm length) on my Five & Five MKII for a couple of hours without any problems. I will do it also in the near time on my Three.

Best Regards

Anders / www.zourman.com

39
Deutsch / Re: DDrum 4 oder 2box Drumit 5
« on: January 07, 2021, 10:03:58 PM »
Hast du diesen Beitrag überprüft?

https://www.2box-forum.com/index.php?topic=3865.0

Best regards

Anders / www.Zourman.com


40
General 2box Drumit 5 forum / Re: New 2Box Speed Light Kit
« on: January 06, 2021, 11:23:47 PM »
It works on DrumIt Five...(the old module)

I have not seen it been sold separately.

Best regards

Anders. / www.Zourman.com

41
General 2box Drumit 5 forum / Re: 2box modul/ddrum4 hihat
« on: January 06, 2021, 11:21:40 PM »
I am afraid not...

The cast hi-hat use a complete other voltage range and hall room sensor.

Best regards

Anders / www.Zourman.com

42
Here's how to import all your Unit settings from an old kit bank to a new kit bank with DKit Manager:
- double click in the explorer to open the new kit bank
- on the first Unit page click Import at the bottom
- browse and select the old kit bank
- click Save to save the changes to the new kit bank, or Save as to save as a new file

As said - a great function - but should it not be a export function also? :-)

Best Regards

Anders / www.zourman.com

43
Hi!

This actually a real nice function in DKIT MANAGER / (Which is quite obvious when looking in DKIT Manager /  :D)

Just to make sure that you go to the first "unit" in DKIT Manager page and click import here. Not from the import function on the main page! Then it import all your configuration settings! Pretty Neat - Big thanks Lustark!

Best Regards

Anders / www.zourman.com   


44
Hmm...

All 2box settings is stored on each SD CARD. (Not on the 2box itself) So if You boot on your old card your usual settings is used...but if you just takes the MKII SD card...it will just take the default settings from this card. So all settings needs to be reproduced or copied to your MKII card. However...if you just take your dkit file from the old card to the MKII card...the settings will be right for your pads...but the sound banks still be your old ones...(the banks are stored in the same dkit file)

You need to make the same adjustments to the settings on all pads on the MKII card to be equal to your old card.

This can maybe be done directly on a computer off line - if you are skilled on Dkit Manager from Lustark.

Best regards

Anders / www.Zourman.com

45
The Kit which Ralf at Drum-tec is using is the #1 kit on the image for Drumit Five MKII.
They should sound exactly the same even if you are running it on a Five MKI.

Best Regards

Anders / www.zourman.com

Pages: 1 2 [3] 4 5 ... 42