Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - UC

Pages: 1 2 [3] 4 5 ... 27
31
Bienvenido Rolando  :)

32
Hi Hatul, welcome aboard (sorry about the registration problems!).

I'm sure you'll find what you need here, and if you can get to a shop that has a demo kit, I'm pretty sure that's all the convincing you'll need :)

33
General 2box Drumit 5 forum / Re: Forum Problems - update
« on: August 03, 2012, 04:26:08 PM »
 :rock:

34
General 2box Drumit 5 forum / Re: Dealer in London or Stockholm?
« on: August 03, 2012, 12:16:50 PM »
Hey there

Give Wembley Drum arena a call as they've got a few rooms dedicated to edrums (good chance to see how much bang for you're buck you're getting when you compare it against a £5k roland kit!).

I'm not affiliated with these guys btw, but it's a great drum shop. Bit of a hike from the tube station, but they'll point you in the right direction.

35
General 2box Drumit 5 forum / Re: Forum Problems - update
« on: August 03, 2012, 11:20:47 AM »
Okay chaps, I think the old host is having a major crisis as I'm not even getting automated responses to my emails from them  :'(

Really sorry if you've lost questions, answers, private messages etc.

I'm satisfied that the board is nice and solid now though - if July's posts ever come back I will try to integrate them back in, or host them on a subdomain or something.

The moral of the story is don't place all your trust in anyone else's backup plans, but on the plus side I've learnt a fair amount of interesting things you can do with Cron jobs!

So with no further delay I'd like to invite you all back in to the playground :)

cheers
Tom

36
General 2box Drumit 5 forum / Re: Forum Problems - update
« on: August 02, 2012, 11:38:38 PM »
Needs must when the devil farts in your face, as they say!

Hopefully be able to set aside a few gig for attachments to posts as long as people respect copyright etc :)

That's for another day though...

37
General 2box Drumit 5 forum / stereo from OUT1 and OUT 2
« on: August 02, 2012, 08:16:10 PM »
Author Topic: stereo from OUT1 and OUT 2  (Read 42 times)

Is there any way to make Out 1 channel right, and Out 2 channel left so I can have a stereo monitor system? I have a small PA that I use with my 2Box and I would like to do this and then set different balances on my 4 toms so I can have my left most tom coming through the left speaker and  right most tom out of the right, balancing things so when I do a fill from left to right the sound follows the direction of my playing? I see how I can balance each pad, but I can't figure out how to assign the individual outputs on the brain to be either left or right. Or do I have to do this with the headphone jack and make a Y cable with a TRS jack on one end and 2 TS jacks on the other ends. I have 2 QSC Ksub subwoofers, a K12 speaker on one pole and a Behringer D212 on the other one. Right now I just run it mono and jump the signal from one side to the other, but I could just as easily run them separately if I could figure out how to assign L and R to 2 outputs on the brain. Can this be done?
Thanks,
Snyde
Modify message
Report to moderator   69.207.192.147 (?)
BURNIN AMBITION

    Hero Member
    *****
    Posts: 516
    Karma: 16
    [applaud] [smite]
        View Profile
        Email
        Personal Message (Offline)

Re: stereo from OUT1 and OUT 2
« Reply #1 on: May 06, 2012, 10:41:52 PM »

    Quote
    Modify
    Remove
    Split Topic

i have done that. i dont remmeber exactly the settings, i can check them tomorrow, but i have a thread somewhere here. if you search for output channels you should find it. otherwise ill check it tomorrow and tell you. i have all toms kick and snare from right and all cymbals from left. i use 2 outputs
Modify message
Report to moderator   79.131.30.185 (?)
2box, bengt, deve, digital drummer, Jman thanx for everything

www.emag.digitaldrummermag.com/

if your playing with a click track, if you cant hear it, thats cause your with iiiiiiiiiiiiiiiiiiiiiiiiiit

if the neighbours arent complaining, you are not practising enough
edtc

    Hero Member
    *****
    Posts: 603
    Karma: 22
    [applaud] [smite]
        View Profile
        Email
        Personal Message (Offline)

Re: stereo from OUT1 and OUT 2
« Reply #2 on: August 01, 2012, 02:19:45 PM »

    Quote
    Modify
    Remove
    Split Topic

Quote from: BURNIN AMBITION on May 06, 2012, 10:41:52 PM

    i have done that. i dont remmeber exactly the settings, i can check them tomorrow, but i have a thread somewhere here. if you search for output channels you should find it. otherwise ill check it tomorrow and tell you. i have all toms kick and snare from right and all cymbals from left. i use 2 outputs


Not sure he was asking this ....

@snydley ,just go to UNIT page4 , there you can assign the SUB to OUT 1-2 ... if you use the clic , you can chose to desactivate it from the SUB bus(on the same page ) , and keep it in the headphone out  , chosing MIX for it

...  for further details , all is in the manual ....


Modify message
« Last Edit: August 01, 2012, 02:23:13 PM by edtc »
Report to moderator   93.16.64.64 (?)

38
General 2box Drumit 5 forum / Forum Problems - update
« on: August 02, 2012, 07:46:43 PM »
Hey people

Depending on the speed of your ISP picking up fresh DNS records, you might well be seeing this on the new host!

I've brought back everything up until July - still hoping to to arrive at last week - I'll see if I can re-integrate whatever I can.

In the meantime, please don't post anything but feel free to browse :)

Cheers
UC

39
Diamond Electronic Drums

Diamond Electronic Drums are based in the UK and recently started stocking 2box kits - they've got years of experience building their own range of (rather beautiful) custom e-drums.


40
hey fellow 2boxers ... why dont you send your best Dsounds to Louis ? (etc)

Yo edtc and all, just want to point out that the forum isn't a place to share copyrighted sounds without permission from the owners of that copyright material - we're duty-bound to delete any dodgy posts etc.

Not taking a political stance, just an arse-covering one :)

41
Sharing drum sounds - wav / aiff / rex / Re: files are missing
« on: January 30, 2012, 04:58:29 PM »
Hi Franz

Like Puttenvr says, please don't double-post :)

If you contact your local distributor you might be able to get hold of a DVD of the sounds or something.

Let us know how it goes.

42
Make mine an Oranjeboom!

Welcome to the forum :)

43
General 2box Drumit 5 forum / Happy Christmas 2box lovers :)
« on: December 24, 2011, 10:59:58 PM »
hope you all had good 2011's...here's to 2012!

cheers
UC

44
General 2box Drumit 5 forum / Re: Cymbals not triggering different areas.
« on: October 29, 2011, 05:56:17 PM »
Solution found.

Jman's suggestion worked.
...
Tony

Hey, nice guide, I've copied & stickied it here

45
Thanks to C828 and JMan for this one

Press the UNIT button to get into the setup system.


When you see this screen tap the PAGE DOWN button once.



You should now see a screen where it says TRIG on the side like this:


Now tap any of the CYMB buttons.


Press down on this knob.


So that the letter reads "M" next to the GAIN number


This should now make the Cup/Bell ring with a firm but not necessarily hard hit.

Hope this helps you it certainly helped me ;) !

If it works for you, SAVE the changes by pushing the PAGE UP button then this button once.


Tony

Pages: 1 2 [3] 4 5 ... 27