Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - FooFighters

Pages: [1]
1
Mask is a retriggering cancel.

2
For me the mask setting makes my kit playable.
Without it the snare and base keep retriggering constantly.

I also use a few AD2 kits, I love them, they are great.

3
Hi, Here's my thoughts on your questions :

I see similar problems with my VH11 and CY15R.
I also got the floor tom sound and for me it was the snare that triggered that.
With crosstalk on high it solved my problem. (but I have a hybrid kit with internal trigger, no roland pad).

CY14C should have bow and edge when plugged in CYMB xA input.
Do you use CyPS(B) as cymbal type ?

How are your mask settings at the PD105 ? I need quite a lot of mask (mostly 5-6) to cancel retriggers on my kit.

Are you using default sounds ? or imported sounds like Digital drummer ?

Regards,

Dennis



4
General chit-chat / lefty's, openhanded or reversed kit ?
« on: March 15, 2019, 02:22:56 PM »
Hi,

I recently got myself a Tama Superstar Classic kit for my mancave.
I have added DDrum Pro triggers and Roland CY cymbals and a Drumit3 module.

It's almost 20 years ago since I last sit behind a drumkit, so lots of practice for me.
But I am trying to figure out what to do with my kit because I am lefthanded.

At the moment I choose a righthanded setup and play openhanded.
So hihat and snare on the left with the ride behind the snare.
But I still have some doubts about reversing my kit into the lefthand setup.
I am still in the beginners fase, so there's still time left to change.

Did any other lefty's faced the same dilema ? What did you do ?

Thnx,

Dennis

5
I bought my Hosa splitters here.. They ship all over Europe, and have them on stock.
https://www.gear4music.nl/en/Books-DVD-and-Sheet-Music/Hosa-YPP-117-Stereo-Breakout-Cable-1-4-TRS-to-Dual-1-4-TSF/L1N

6
General 2Box Drumit 3 Forum / Re: Tom split problem
« on: February 22, 2019, 08:10:42 AM »
Thanks for the help guys. I have ordered some Hosa YPP-117 splitters.

7
General 2Box Drumit 3 Forum / Re: Tom split problem
« on: February 20, 2019, 12:09:53 PM »
After double checking the splitter it seems that all connectors are stereo.
I have ordered 1x stereo (M) and  2x mono (F). Lets see if that fixes my problem.

 :drum1:

8
General 2Box Drumit 3 Forum / Tom split problem
« on: February 20, 2019, 08:19:58 AM »
Hi Guys,

I use my Drumit 3 in my Tama Superstar Classic setup.
Triggers are DDdrum Pro (AcTr2 input) and Roland CY series cymbals.

At the moment my kit has 12/14/16 toms (Toms2-4), 1x ride (Cym 2 @ CYPSB), 2x crashes (Cym 1-3 @ CYPS), 1x crash CY12C (at Tom1 @ PADPP). And afcourse hihat, snare and kick in the correct inputs.

I recently bough a Roland VH11 hit to replace my Roland CY12C/R that I used as hihat.
Now I got this spare crash and want to use that as a splash or china cymbal.

I tried 3 options

Option 1:  Used stereo splitter in TOM1 input to connect 2 Roland Cymbals (@ PADPP).
Result : Getting 2 exact the same cymbals sounds on both. When first one is hit, I can see it's TOM1 in unit page. When 2nd cymbal is hit also TOM1 (instead of TOM1 Rim).
When I enable splash sound in Kit page to Tom1 Rim, I get the China on bow and splash on edge on both cymbals.

Option 2 : Used stereo splitter in TOM3 input to connect 2 Ddrum Pro triggers (TOM3+TOM4).
Result : Similar to option 1. I get TOM3 on my 14 inch and also TOM3 on my 16 inch.
With TOM3 Rim sound as Splash there no way to get the splash sound when hitting the toms.

Option 3 : Used stereo splitter in SNARE input to connect 1 Ddrum Pro snare trigger and 1x CY12CR cymbal (PPAD).
Result (with splash on Snare Rim) : Snare sound on my cymbal (PADPP), Splash on Rim of snare (AcTr2).
At least 2 different sounds, but I cannot get the SNARE input to use heads, only rim.

Switching the cables in the splitter does not change anything.

Am I missing something ? Or is this a hardware mismatch ? Or my lack of experience  ;D

Hope somebody can point me in the right direction.

Thanks,
Dennis

p.s. this is the splitter I used.. can the splitter be the problem ?
https://www.onlinekabelshop.nl/splitter-6-35mm-jack-0-20-meter


9
Thanks, I will check out the 5 presets. Only got the 3 database now.

10
General 2box Drumit 5 forum / Re: Anyone using Steven Slate snare in 2 Box?
« on: February 19, 2019, 12:47:34 PM »
Altough I prefer Addictive drummer 3, I also tried the free kit from SSD5.
It's a 6 pcs Ludwig kit. Sound very good. Free download from their website.

11
Hi guys,

I am searching for a Pearl Chad Smith signature snare sound.
Can someone point me in the right direction ?

Thanks

12
General 2Box Drumit 3 Forum / Re: Anyone use Addictive Drums 2 with DrumIt?
« on: February 18, 2019, 11:59:49 AM »
I have updated my SD card with several Addictive drums packages this weekend.
I love them.. My hybrid Tama kit sounds great  8)

Check Thomann.de, they have a 33% discount on XLN products at the moment.
198 euro for 6 extendsions. But be quick, sale is ending soon.

Pages: [1]