Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - paulf707

Pages: [1] 2 3 ... 8
1
Just giving this one more 'nudge' here before I put it on eBay....

Generally, 2Box kits have been going for £600-£650 on eBay recently, and mine includes the 4th Tom, 3rd Cymbal, and an extra Tom and Cymbal (modified from the HiHat). I accept the HiHat is modified which may not be considered an improvement to all potential buyers, and the snare stand is missing, but I still think the 2Box elements are worth around £650

The other items (TD3 brain, 2 cymbals, 4 pads and assorted rack clamps and stands) are probably worth somewhere around £100.

If anyone is interested in this, and would like to make me an offer on this kit then please get in touch.

Thanks

2
I no longer have room or time for my 2Box Drumit5 kit. It is currently dismantled, and I would rather it went to someone who will enjoy it rather than sit here and go (more) out of date.
https://1drv.ms/u/s!AvEC4KT8mxCMq61ifpswNpc_uLVNQA
https://1drv.ms/f/s!APEC4KT8mxCMp-l5

I bought it in various lots second hand so I cannot vouch for its entire life, but since I've had it's been played (rarely) at home, and never gigged. Functionally, I believe it is all working 100%, but cosmetically there are some scratches on racks and the orange backs of cymbals (a common problem). There are a couple of clamps where 'proper' drum screws have been replaced by nuts and bolts, and a couple of the mesh head have 'snags / pulls' in them (but still play and trigger fine).

I have modified the HiHat to separate the pad from the foot controller (so that you can position the pad wherever you want). Details about what I did are here:
https://www.2box-forum.com/index.php?topic=3874
I don't have the original snare drum stand as I preferred to mount the snare pad on the rack (and some of the clamps have longer 'L arms' to help with this).
I also cut one of the 60cm curved horizontal side arms in half and used one each side (at 30cm) - I found this was enough and reduced the kit footprint slightly. There are other rack tubes in the 'other' section so you could have 60cm each side if you needed it (although one of them would be silver and not grey)
 
The Drumit5 has the 32Gb SD card modification (done before I purchased it) and contains pretty much all the free samples available (drumit5, drumit3 and many others). I will of course remove anything that is copyrighted that I am not allowed to sell legally.

2Box
-3 x 14" Cymbals
-1 x 12" HiHat (modified)
-1 x 12" Cymbal (modified HiHat)
-5 x 10" Pads
-1 x 12" Pad
-1 x 16" Kick
-Kick Pedal with 'rubber ball' beater (alternative felt/plastic beater also included)
-Drumit 5 with 32Gb SD Card Modification and 2Box PSU
-Rack
--2 x 70cm Uprights
--2 x 90cm Uprights
--2 x 90cm Curved Horizontals
--1 x 60s Curved Horizontal
--2 x 30cm Curved Horizontals
--8 x T Connectors
--6 x Pad mounts (clamp and hex rod)
--3 x Cymbal mounts (clamp and hex arm)
--2 x Modified Cymbal mounts (clamp and bolt)
--1 x Kick drum mount and clamp
--HiHat Stand and clamp (modified)
--1 x custom Drumit5 mount (plastic)
--1 x custom stick holder
-Cables
--5 x 50cm TRS
--5 x 100cm TRS
--6 x 200cm TRS
--1 x 300cm TRS

I expanded the 2Box kit with additional pads, and then bought a TD3 as an auxiliary trigger for even more pads/cymbals. If someone wants the entire kit, then great. I do not want to split the 2Box kit, but I would consider selling that and the TD3 and other pads as a separate lot if preferred.

Other
-Roland TD3 Brain and generic PSU
-1 x 7½" HD1 Rubber Pad (single zone)
-1 x 10" CY-5 Cymbal (single zone)
-1 x 8" Pintech TC Splash (single zone)
-3 x 4" Koby Nano Pads (single zone)
-Rack
--1 x 40cm straight pipe (silver)
--1 x 60cm curved pipe (silver)
--4 x Clamps for cymbal/tom arms (2 x Dixon, 2 unnamed)
--3 x Pearl type tom mounts (for Koby pads)
--1 x Cymbal Arm
--1 x Alesis T clamp (plastic)
--1 x TD3 Mount (plastic)
--4 x adjustable pipe connectors (and 2 small lengths of tube)
-Cables
--5 x 100cm Right Angle TRS
--3 x 130cm Jack to Mini Jack TS (for the Koby pads)

It is difficult to put a price on this, as it is a large collection of items (and will be worth different values to different people).


 

3
General 2box Drumit 5 forum / Re: Convert .dsnd files to other type
« on: September 22, 2019, 11:18:48 AM »
https://www.kvraudio.com/product/softdrum_ltd_by_fretted_synth_audio
Simple free sample player - by default has 4 layers per slot (and 12 slots).
Also I'm thinking you could assign the same midi note to two slots to get more layers.
I'm thinking of giving this a try; I've started using a TD3 for auxiliary pads and splash cymbals, and I'm thinking of downloading some Drumit or SD3 cymbal samples and using SoftDrum…..

4
Private - for sale / wanted / Re: Buying 2box parts
« on: September 19, 2019, 04:51:16 PM »
Not sure where you are, but you can get spares in UK from info@handinhand.uk.net

5
Sharing drum sounds - wav / aiff / rex / Re: New sounds from 2box
« on: August 20, 2019, 07:07:45 PM »
I am grateful for 2Box's continued support for us by continuing to provide new sounds.....

But, I am a little disappointed by the lack of care and attention to detail from whoever manages 2Box's website. I've just downloaded the latest 60 sounds from the site; there are 7 duplicates (and one triplicated) and I think there were one or two others with mis-matching names and filenames.
I know many of you will think this doesn't matter (and maybe it doesn't) - but it doesn't really put 2Box forward as a professional company.
As a 2Box (and ex ddrum4) owner I know how good these products are; but they are always let down by the way they are promoted and managed.

Also, most of the recently released samples seem to be loops and electronic sounds - maybe that's a conscious effort to widen the appeal?

Hopefully they are saving the 'good stuff' for the release of the new module - let's hope we see some amazing new kits / cymbals - and that they are made available to us Mk 1 owners  ;D

6
General 2Box Drumit 3 Forum / Re: Zones and Mute Groups
« on: July 01, 2019, 04:30:55 PM »
I found a similar anomaly with the hihat samples:

http://www.2box-forum.com/index.php/topic,3906.msg28314.html#msg28314


7
General 2Box Drumit 3 Forum / Re: Limit hihat open sound
« on: May 29, 2019, 06:05:44 PM »
You could probably do something with calibration - set the clutch 'twice as high' and calibrate, then move the clutch back down and see how that performs?

Alternatively, do something with the DSOUND editor to create new sounds using only closed to half open sounds.....

8
DrumIt 5 Hardware / Re: Alternative trigger pad for hihat
« on: April 12, 2019, 05:02:16 PM »
Have a look at this - I did it with two hihat pads, but you could change the second hihat for a mesh head or any other alternative (quiet) pad


http://www.2box-forum.com/index.php/topic,3874.msg28164.html#msg28164


9
Other e-drum systems / Re: Prevent double kick hits?
« on: March 11, 2019, 08:49:03 PM »
Mask, on the Unit Spec screen.
Page 51 in the manual.

11
There is a new function in the latest OS that allows program change from a pad
CFUNC
N Kit Selects the following KIT (NEXT KIT).
P Kit Selects the preceding KIT (PREVIOUS KIT).

12
Bottom of page 41 in the D3 manual says how to save unit settings:

If you have made changes in the UNIT mode, this will be indicated by a „?“ next to SAVE.

To make these changes permanent, press the left DATA button. The „?“ disappears and
the changes are saved. Please be aware that for this the SAVE mode on the page PREF
has to be switched on (see page 59). Should the "?" still be there after you pressed the
DATA button, the SAVE mode is disabled.

13
General 2Box Drumit 3 Forum / Re: Tom split problem
« on: February 21, 2019, 08:59:14 PM »
Yep, the link the original poster quoted wouldn't work; it needs to be stereo to 2 x mono
I use these:
https://www.ebay.co.uk/itm/15cm-6-35mm-Stereo-Jack-Plug-to-2-x-6-35mm-Mono-Sockets/190504771757

Highly recommended seller, I get all my cables from them.

14
General 2Box Drumit 3 Forum / Re: Anyone use Addictive Drums 2 with DrumIt?
« on: February 08, 2019, 12:45:51 PM »
Is there any documentation with AD that confirms how many sample levels are recorded in there? I don't have SSDE yet, but have experimented exporting samples manually. I'm never sure how many to use. There's no point exporting 128 velocity samples if the original SD samples were based on 32?

15
General 2box Drumit 5 forum / Re: New drumit5 module!
« on: February 04, 2019, 06:50:22 PM »
Some of the benefits of the D3 have already appeared in the D5 OS releases, but those that relate to the hardware inputs are not going to translate to the original D5  :-[

Pages: [1] 2 3 ... 8