News:

2box forum: accident-free since the last one.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Topics - joeytenka

#1
Hello all!  :)

I'm a fresh 2box user and I'm just trying to switch from Roland modules to the Drumit5 MKII module (current OS), unfortunately not without problems and the manual is also no real help. Therefore I hope to find help here ...

-HiHat: I have a Yamaha RHH135 hihat connected to the module with 2 stereo cables (according to the manual), but I hear only the open sound and no chick or any closed sounds. When I kick the HH I see that the values RAW change (I can't hear anything though). Do I have to activate something in the module that I have not yet discovered?

-Snare (#1): I have connected a DIY snare with 2 Piezos to the module (one for the rim, one for the meshhead ... similar to the Drumtec snare construction) and selected "PadP" – hoping to 2 zones for the pad. With my Roland modules, this also works, but the Drumit shows me only "1" under Zone and I can't adjust that to "2" ... even if I choose other pads, it doesn't change anything. Again, the question, what do I need to do to get 2 zones?

-Snare (#2): I "suffer" from double triggers ... already have the gain at 0 and still double triggers (the meshead is super-tight nad needles to say, not having the problem with my Roland module (TD-20 by the way) ... even if I change the threshold it doesn't help. Is my snare too "hot" for the Drumit trigger input? What can I do to get this to work?

-CYMB 1B - 3B: I'm afraid I already now the "solution" to the problem here, but I just wanted confirmation if this is actually the case (since I can't really believe it): You can use these 3 inputs exclusively as cymbal bells or similar of the cymbals connected to CYMB 1A - 3A and not as freely assignable/additional input channels, right?

I thank you in advance for your help (and I hope I didn't miss anything helpful in the manual or the forum  ;))!

Many thanks and best regards,

Michael
#2
Hallo zusammen!  :)

Ich bin frischer 2box-Anwender und versuche gerade von Roland-Modulen auf das Drumit5-MKII-Modul (aktuelles OS) umzusteigen, leider nicht ganz problemlos und das Manual ist auch keine wirkliche Hilfe. Daher hoffe ich, hier Rat zu finden ...

-HiHat: Ich habe eine Yamaha-RHH135-Hihat mit 2 Stereokabeln (vorschriftsmäßig) an das Modul angeschlossen, höre aber nur den offenen Sound und keinen Chick bzw. keinerlei geschlossene Sounds. Wenn ich die HH trete sehe ich aber bei RAW dass sich die Werte ändern (nur hören tue ich eben nix). Muss ich irgendwas aktivieren, dass ich bisher noch nicht entdeckt habe?

-Snare (#1): Hier habe ich eine DIY-Snare mit 2 Piezos angeschlossen (einer RIM, einer Fell ... ähnlich den Drumtec-Snares konstruiert) und zwar als PadP, in der Hoffnung hier auch 2 Zonen zu haben. Bei meinen Roland-Modulen funktioniert das auch absolut hervorragend, aber das Drumit zeigt mir unter Zone nur ,,1" an und ich kann das nicht auf ,,2" anpassen ... auch wenn ich andere Pads wähle ändert das nichts. Auch hier die Frage, was muss ich tun um 2 Zonen zu bekommen?

-Snare (#2): Ich ,,leide" unter Doppeltriggern ... hab den Gain schon auf 0 und immer noch Doppeltrigger ... auch wenn ich den Treshold verändere hilft das nichts. Ist meine Snare zu ,,hot" für den Triggereingang? Was kann ich tun um das zum Laufen zu bekommen?

-CYMB 1B – 3B: Ich fürchte, ich kenne hier die ,,Problemlösung", aber ich wollte nur noch mal eine Bestätigung, ob das wirklich so ist (da ich es nicht glauben kann): Man kann diese 3 Eingänge ausschließlich als Beckenkuppen o. ä. der unter CYMB 1A – 3A angeschlossenen Becken benutzen und nicht als frei belegbare, weitere Eingangskanäle, oder?

Ich bedanke mich schon einmal im Voraus für eure Hilfe (und hoffe, ich hab weder im Manual noch im Forum etwas Hilfreiches überlesen   ::))!

Viele Grüße

Michael