Topics

Hey guys I’ve searched but can’t seem to find my exact problem.
Does anyone have Jobeky drums?
Basically I’m having issues with the rims triggering whenever I hit the main drum.
Mainly on the snare and high Tom.
I’m sick of messing with settings.
There’s nothing more distracting than when you go to burst into a chorus to have your snare backed with an audible cross stick.
Can anyone tell me settings to try?
I feel like I’ve tried a lot.
Look forward to hearing some tips or being redirected and told to bigger off lol

Just looking for some advice.
I’ve recently swapped out my drumit 5 module for the drumit 3 and have replaced my hihat and ride with the Roland equivalents.
The 2BOX cymbal I was using as a ride is quite beat up,
A lot of the rubber round the edge had split so I have used black insulation tape to keep it together.
It still works great, however my question is should I even bother trying to sell it on eBay or something?
Would it be worth anything? Or is it destined for emergency back up cymbal or the bin?

As you can imagine this is annoying.
Using standard 2box cymbal.
I read somewhere that using a splitter can cause issues but I figured as it’s nothing to do with my ride or bass drum then it’d be fine.
Just incase I’m using a splitter on the high tom and using the rim as a splash.
I’ve got crosstalk on high for both cymbals.
Ride works perfect when I’m not hitting the bass drum.

Been trying to keep an eye out on eBay and whilst I know there’s a hand full of stock left on a few sites I was hoping to get one used.

Hey guys, I thought I'd try asking here as you lot know everything.
In short I've upgraded my kit and replaced all the cymbals with jobeky real feel ones.
Whilst they are quiet compared to real cymbals they're still a smidge louder than the rubber alternative.
This didn't bother me until my friend came round to jam and I found I couldn't really use the ride of crash cause at the volume we were playing I could barely hear the sample over the ting ting of the stick hitting the metal.
I bought a random cymbal silencers set from Amazon but whilst it does the job they completely kill the sensitivity no matter what I do to the settings.
I notice stealth accompany they're kits with cymbals mutes so I was wondering how to get some that will work?

I know a lot of you guys are pretty tech savvy and as this is an audio problem I thought maybe someone on here would know.
So basically my problem is a recently bought a projector and decided to connect it to my stereo via rca.
The projector is a acer p1185 and it has a 3w speaker built in.
When I use it with my amazon fire stick and connected to my stereo the volume is significantly quieter than the output the stereo normally gives.
My stereo is about 6 years old but it's a decent one with 235w.
Normally if I listen to a cd on full blast the room will shack.
I will add that using a rca to connect to my iPhone it doesn't quite go as loud but it's nowhere near as noticeable as when it's connected to the projector.
All the volumes are on full, I have looked at the sound options on the projector and in the fire stick.

Hey guys I've decided I want to start using superior drummer for my samples.
And whilst I'm aware I can use midi with the 2box module I was thinking about selling the module for a cheaper one (to get some pennies)
Does anyone have any recommendations?
What issues will I run in to?
I currently just use the module but my kit consists of Roland and jobeky pads and cymbals.

Are these still going?
Website says 2004-2008!
I've sent two emails with no response.

Hey guys you're all pretty knowledgable so I figured I'd ask here.
I've been playing to music via connecting to my phone but recently it won't register.
I've tried everything I can think of, checked my phones audio input bought a new cable and even a new 6.35 to 3.55mm adaptor and it still won't work.
Are there any other ways to connect?
Or is it an easy fix?
It's still under warranty but I really don't wanna have to send it off.
Any top tips would be greatly appreciated.
It's fun to practice but i miss playing to music.

Had a bit of a search but couldn't find anything.
Are there any cymbals I can get that will work with 2box whilst miles ping all 3 zones?
I like Roland cymbals but I know I'd have to sacrifice one of the zones and I don't want that so what are the alternatives?

Recently got one of these and it is great but it's just not for me.
Time to kick the drumming dream and be a grown up.
I'm looking for £1600 as it cost me £1700.
There's no box but if anyone is interested I can upload some images.

Hey I just got a 2box a few months ago after having Roland for years.
2box sound much better but I'm having so many issues I need help.
Finally got round to doing the software update last weekend and downloaded some more kits off the 2box site.
However when I use a new sample sound it won't let me save the kit.
So now every time I turn it on I have to change all the toms and cymbals to what I like. It's really frustrating.
Also I can't seem to get the bass drum to go loud enough.
It triggers fine but I feel it needs to be louder and as far as I can tell the volume for bass is at max.
I'm really starting to wonder if this is for me.
The drums sound so much better than Roland but user interface is a pain.
If anyone can give me any top tips.
I see a lot of threads regarding technical stuff but it means nothing to me.
The worst part is I truly thought I was alright at computers and technology ha

Got one for sale if anyone's interested.
I am willing to ship outside the uk.

I'm really sorry about posting this because I'm sure there must be loads!
I've been looking around the forum trying to piece together the answers to my questions but there's so much I just don't understand.
Basically I wanted a 2box but couldn't find one at the time cause they were sold out everywhere so I ended up with the Roland td25kv.
After having it a few months now I really like the look and feel of it but the sounds are awful.
I can't straight up sell it as I'm tied to a finance deal but I was thinking I could sell the brain and get the 2box brain.
Would it work?
What do I need?
Am I best changing the cymbals aswel(I hear 2box doesn't work very well with Roland cymbals)
Anything need to change with the hi-hat?
If I change the cymbals will I have to get new mounts to?
Will the 2box brain mount on the same thing the td25kv brain does?
And any thing else I need to take into consideration?
I apologise if this annoys anyone but I'd really appreciate someone's time.
Thanks

Ps hi I'm Ryan.