Print Page - 2BOX Hit Hat Init Problem

Title: 2BOX Hit Hat Init Problem
Post by: mika77f on March 07, 2011, 05:14:34 PM

Hello,

I have just changed my HitHat because my original one get some problems.

I have received the new one but when I am tryng to init it and it told me No Change.

It seem it recognize it always open.

I am up to date with the BOOT and the OS in my 2BOX.

Did anyone have an idea before to send it back ? :-)

Thank you for your help

Title: Re: 2BOX Hit Hat Init Problem
Post by: fishmonkey on March 08, 2011, 08:12:40 AM

can you outline the exact steps you have been taking when doing the calibration?

Title: Re: 2BOX Hit Hat Init Problem
Post by: mika77f on March 08, 2011, 08:28:49 PM

Hello,

Step by step :-)

-Turn off the DrumIt Five Module
-Connect the hit-hat
-Turn on the module
- select unit
- Then Hit-Hat init
-Loose the hit hat and click on init
Then put the hit hat on high position and init on high position.

I did it many times with my previous hit-hat but with this one, I have no Change message.

Like if the hit hat stay in open position ?

I have check the connector , the Mettalic pad under the hit-hat.

Any ideas ?

thank's

unofficial 2box forum

2Box Drumit 5 Forum => DrumIt 5 Hardware => Topic started by: mika77f on March 07, 2011, 05:14:34 PM