Print Page - Ride cymbal triggers bell sound while playing normal ride pattern

Title: Ride cymbal triggers bell sound while playing normal ride pattern
Post by: Torbs on September 20, 2022, 06:41:25 AM

Hi ya

I have a problem with my ride cymbal. During playing a normal ride pattern it triggers just the bell sound for a while and switches back to normal ride sound after some time. Any advice how to fix it? What alternative hardware as a ride cymbal would you recommend?

Thanks in advance.

Toto

Title: Re: Ride cymbal triggers bell sound while playing normal ride pattern
Post by: Deve Loper on September 20, 2022, 08:32:05 PM

Hi. Is this the original DI5? Those cymbals implemented bell sound by velocity switching.
So probably you have to adjust the gain.
From the manual.

When the TYPE is Cym12 or 14, the GAIN parameter has an extra cup value selectable between Low, Medium or High. First turn GAIN so only hard hits on the bow give full level on zone 4. Then click GAIN so only hard cup hits give full level on zone 1. (Note: only relatively hard cup hits result in zone 1, otherwise zone 4.)

Best,
Deve.

unofficial 2box forum

2Box Drumit 5 Forum => DrumIt 5 Hardware => Topic started by: Torbs on September 20, 2022, 06:41:25 AM