I tried to replay some MIDI recorded drums from Logic Pro over midi to my MKII today...but after 2-3 hours of trying to get the right map for 2box...and still not getting the kick, snare or hihat to work over midi, only the cymbals and toms...I changed to my DrumIt Three...and it worked directly. Same OS, same map in both systems.
Have anybody else seen this problem with MKII?
Best regards
Angr77/ www.Zourman.com
Were you ever able to figure this out?
If I get another 2Box it would definitely be the MKII, however I 100% would need MIDI to work as that is how I trigger the sounds, so this would be a huge dealbreaker.
Sorry - no I was not able to solve it...but I might spend some time on it...it worked fine on my Three..so for moment I am good...but MKII shows the problem....
Anders / www.Zourman.com
I'm not sure of the problem: do you want to record midi from the module into Logic or the opposite?
You can change the midi mapping inside the module. So in Logic create a drummer track, convert it into midi to get the piano roll to display the midi mapping and apply the same mapping in the module.
Also make sure the midi track in Logic is set to the same midi channel than in the module, which is channel 2 by default.
It was sending midi from Logic to my Drumit 5 MKII...it was totally impossible to change any midi note/mappings in the MKII...and it just triggered on rubbish. Trust me...I know midi...:-) ...after several hundreds of hours as beta tester for Addictive Drums. :-) Then I used the same settings with my DrumIt Three...and it work fine and exactly as expected. Same OS, Same SD card...which made me suspicious...(I have a pre-release of the MKII)
Best Regards
Anders / www.zourman.com