All the rims on my kit (bar the snare) of wired up to more useful pads
Tom 1 rim goes to a crash
Tom 2 rim goes to the splash
Tom 3 rim goes to a small pad
Tom 4 rim goes to a 10" A2E drum I converted.
In the Drumit 3 I can hit any of the pads to set it's parameters, like the sound it plays, etc..
For example if I the crash attached to Tom 1, the D3 shows me the Tom 1 Rim and it is set to a crash sound.
Toms 1, 3 and 4 work
Tom 2 rim does not.
I can use Dkit Manager to assign a sound to the rim of Tom 2, but I cannot hit the little splash and have the D3 select it. The splash works. The wiring is correct. Dkit Manager can set the value, but the D3 cannot.
Is there some setting that allows this that may not be set on Tom 2?
Cheers.
Hi!
Is it just the issue to not be able to select/assign the splash...or doesn't it trigger at all (even if you created the right settings in dkit manager)
Best regards
Anders / www.Zourman.com
Anders
The splash plays fine.. I set the sound in Dkit Manager and Tom 2 and the splash work perfectly.
But the module does not know I am hitting the splash despite the fact it makes the sound. I cannot change the sound on the rim of Tom 2 as the module just selects Tom 2 if i hit it.