Text only | Text with Images

unofficial 2box forum

2Box Drumit 5 Forum => General 2box Drumit 5 forum => Topic started by: Mannymac on March 18, 2020, 01:04:32 AM

Title: Drumit Five MkII and Roland FD-9
Post by: Mannymac on March 18, 2020, 01:04:32 AM
Hi 2boxers,

Got the Drumi Five MkII today in the UK and it is all amazing, other than one issue.

I have a Roland FD-9 controller. In the compatiblity list for the Drumit Three there is the FD-7 listed and I thought as they are functioanlly comparable I will give it a go.

I went to HCAL screen, made sure to set the calibration screw to 800 and thenwhen I press my foot on the hi hat controller pedal I can see the raw value change.
All fine and good, I then calibrate the hi hat according the manual but now when I press the pedal nothing happens, even though the raw values change. The hi hat is not even closing and opening on the HCAL display.

Has anybody had an issue like this with the Drumit three and this controller? Do I need a Zourman kit for this?
Title: Re: Drumit Five MkII and Roland FD-9
Post by: ANGR77 on March 18, 2020, 06:03:48 AM
Hi!

I am pretty sure that the FD-9 will work without my box...on MkKIi.

Please check the hset page and that the hhpos parameter is set to “off”...I would guess that it has has got a value by accident...

Best regards

Anders / www.zourman.com
Text only | Text with Images