unofficial 2box forum

2Box Drumit 5 Forum => General 2Box Drumit 3 Forum => Topic started by: Sibblon on October 30, 2018, 06:26:42 PM

Title: hihat raw calibration
Post by: Sibblon on October 30, 2018, 06:26:42 PM
hi guys i wolud like to know what's wrong with this module (drumit three), cause i had a calibration raw problem too, i mean in the begining i was using 2 box hihat so in the manual they said to turn the screw behind for calibrate it (for 2box hihat 600-650) but the problem is when i turn the screw that never reach that numbers, instead I got 730-740  >:( , so i decided to change the hihat pad for a roland vh11 and the setups works well, so when i turn the raw screw using the roland hihat pad that give me all the numbers so i can select 800-850 as recommended in the manual, but when i use the 2 box pad well there's no chance to reach the parameters seggested in the user manual.
Title: Re: hihat raw calibration
Post by: ANGR77 on October 31, 2018, 01:13:18 AM
Hi!

It looks like you have a extremely tiny gap on the raw value on the 2box hh. How does it work in reality when playing? Not good?

I have to try my old 2box hh and see what values I get.

Best regards

Anders / www.zourman.com
Title: Re: hihat raw calibration
Post by: Miximus on December 15, 2018, 10:18:32 PM
Quote from: Sibblon on October 30, 2018, 06:26:42 PM
hi guys i wolud like to know what's wrong with this module (drumit three), cause i had a calibration raw problem too, i mean in the begining i was using 2 box hihat so in the manual they said to turn the screw behind for calibrate it (for 2box hihat 600-650) but the problem is when i turn the screw that never reach that numbers, instead I got 730-740  >:( , so i decided to change the hihat pad for a roland vh11 and the setups works well, so when i turn the raw screw using the roland hihat pad that give me all the numbers so i can select 800-850 as recommended in the manual, but when i use the 2 box pad well there's no chance to reach the parameters seggested in the user manual.

Hi i got the same problem as you  i get 792-800 ?
Title: Re: hihat raw calibration
Post by: ANGR77 on December 17, 2018, 06:13:18 AM
Hi!

I just tried my old 2box hi-hat on DI3.

Mine gave a value between 621-711. (And when pressing the pedal about 606)

Best Regards

Anders / www.zourman.com / Hi-hat & Ride Conversion Module for 2box.
Title: Re: hihat raw calibration
Post by: Sibblon on April 01, 2019, 05:09:29 PM
Hi thanks for your answer, I just took roland vh11 it works better, but still having some problems with the cymbals settings, I'm using 2 box cymbals by the way, I mean is just hard to have bell sounds on them all those settings are driving me crazy, so of you have some advices for have better response cause sometimes I rise up the gain of the ride maybe at 14 or more and the threshold at 38/ 40   for have a better response but it generates xtalk from the ride, when I head the Tom close to the ride pad, I would like to have a responsive ride for a light stroking but it seems impossible, at least for me.
Kind regards