unofficial 2box forum

2Box Drumit 5 Forum => DrumIt 5 Hardware => Topic started by: ANGR77 on January 26, 2018, 08:02:08 PM

Title: Roland 3 Zone Conversion Module for 2box
Post by: ANGR77 on January 26, 2018, 08:02:08 PM
Hi all!

What do you think about this?

https://youtu.be/5cBdUjTaR2s (https://youtu.be/5cBdUjTaR2s)

I did finally finish a conversion module for using Roland CY-13R and CY-15R rides together with the 2box DrumIt Five module.

Have a nice weekend!

Anders / www.zourman.com
Title: Re: Roland 3 Zone Conversion Module for 2box
Post by: Slamstick on January 27, 2018, 01:40:01 AM
Nice Anders. They sound great . I know you have also been working on these conversions for a long time. When or maybe I should say if the drumit 3 come out, won't this only really be of interest to guys like me with the drumit 5 . Of course I know a ton of 5 owners won't even bother with the 3 so maybe I answered my own question, lol
Title: Re: Roland 3 Zone Conversion Module for 2box
Post by: ANGR77 on January 27, 2018, 08:36:01 AM
Absolutely...this conversion is an option for the current 6000 users of the 2box Drumit Five.

Best regards

Anders / www.zourman.com
Title: Re: Roland 3 Zone Conversion Module for 2box
Post by: Nico on May 28, 2023, 10:22:32 AM
Hello,

Would these converters also work with other brand cymbals as long they have bell and edge (piezo/switch) TRS sockets ?
Is the bell/bow seperation still as good as when using the 2-zone CyCup setting ?
Title: Re: Roland 3 Zone Conversion Module for 2box
Post by: ANGR77 on May 31, 2023, 03:29:19 AM
Yes, this module works also with any piezo/switch/switch implementation like the 3 Zone rides from Roland, ATV and Lemons.

The separation is not as good a pure piezo/switch implementation, because of it's nature based on the 2box volume detection bell implementation found on MKI. (Where the logics behind the solution is that a bell hit is generating a 10 db higher signal)

But a 3 Zone ride with this module will achieve better results compared to the original 2box MKI 3 zone cymbal implementation.

Best regards

Anders / Zourman.com

Title: Re: Roland 3 Zone Conversion Module for 2box
Post by: Nico on May 31, 2023, 07:06:03 PM
Thank you very much for your detailed response.

Best regards