unofficial 2box forum

2Box Drumit 5 Forum => DrumIt 5 Hardware => Topic started by: alainV on January 06, 2010, 03:01:40 PM

Title: carbone rack with Gibraltar hardware
Post by: alainV on January 06, 2010, 03:01:40 PM
The clamps diameter of the drumit5 is the same as the diameter of Gibraltar clamps!!!!
My rack is made of carbone tubes. With a good DW hihat stand and a good bass drum pedal, this drum is parfect!
Title: Re: carbone rack with Gibraltar hardware
Post by: Remi on January 06, 2010, 04:25:02 PM
Any pictures?
Title: Re: carbone rack with Gibraltar hardware
Post by: roel on January 06, 2010, 05:35:43 PM
The clamps diameter of the drumit5 is the same as the diameter of Gibraltar clamps!!!!
My rack is made of carbone tubes. With a good DW hihat stand and a good bass drum pedal, this drum is parfect!

Iam curious also, so can you make some pictures.
Title: Re: carbone rack with Gibraltar hardware
Post by: alainV on January 31, 2010, 07:12:07 PM
The carbon bars are from Carbonlite
(http://farm5.static.flickr.com/4058/4319021349_4a23f8bf23.jpg)
No upper front bar

(http://farm3.static.flickr.com/2703/4319014427_55c12d8b31.jpg)
Kick attach

(http://farm5.static.flickr.com/4051/4319006727_4d01935708.jpg)
Hem.. too much empty beers in the room...

(http://farm5.static.flickr.com/4011/4319750912_51c0c8c58c.jpg)

(http://farm5.static.flickr.com/4012/4319762984_2ed25b4c4f.jpg)
I use an old Roland's 4 zones pad for the unused sounds of the unit

(http://farm5.static.flickr.com/4030/4319027537_d827cb60ac.jpg)
the snare stand is an arm fixed on the rack