Recent posts

#51

e-drum DIY / modifications / Re: 2Box Hihat Controller

Last post by lkroeker - March 25, 2024, 12:30:54 AM

ALSO.. I was blowing Hall sensors on a weekly basis before I started the following practice:

I just blew mine again. Do you happen to know a compatible part number for a sensor I can buy to replace it? I can't find anything based on the markings on the chip: "407 575 92 ."

Or is there an easier way to source replacement boards? Last time it took a couple months to get a replacement from the distributor here in Canada. I think eventually 2box just shipped me one directly. 

I'm thinking I might just need to go with a different hat solution as these clearly aren't handling being moved around well.

#52

General 2box Drumit 5 forum / 2box MK1 kit - hihat rod and c...

Last post by sfallows - March 24, 2024, 12:07:03 PM

Hi all,

  I've got one of the original kits that came with the Drumit5 MK1 and I'd like to use my own hihat on the original stand.  The problem I have is that none of the hihat clutches I've tried fit on the rod that comes with the integrated hihat stand.  Does anyone know of a clutch that fits the wider 2box rod?

Thanks,
Scott

#53

General 2box Drumit 5 forum / Re: Compatibilità centralina D...

Last post by Deve Loper - March 19, 2024, 01:54:20 PM

Hi Morillo.
I pm'd you.
See your inbox.
Cheers, Deve.

#54

General 2box Drumit 5 forum / Re: Compatibilità centralina D...

Last post by welshsteve - March 17, 2024, 06:16:07 PM

Maybe I should look for original MK1 first model hardware (orange/black) but I think it will be almost impossible.

You can use other pads with 2box Mk1 module. But avoid Piezo/switch style. That's things like Yamaha TP/XP pads.

The newer ones should work well as they're piezo/piezo.

You can also get decent results with an acoustic snare with a mesh head and an external rim trigger (like 2box Trigit) or Ddrum, I am told Roland RT can work too.

Internal triggers might be better. In fact, you'd do well with Triggera Intrigs, I used them with a 2box module for quite a while and found them great with Mylar heads! So they'll be good with Mesh. You'll need to increase the gain though compared to Mylar.

There's no shortage of options. With the newest OS available for 2box Mk1 modules you'll have better options for cleaner triggering between head and rim.

Steve

 

#55

Setup guides and tips / Re: Pintech Hihat Controller L...

Last post by welshsteve - March 17, 2024, 12:37:08 AM

I have a pair of Vistalite hihats and that very controller. I bought them off eBay a few years ago, gigged with it for a long time. I don't recall any issues, in fact it was an excellent set up. And I was using a drumit3 at the time.

I no longer have a drumit3 and I stopped using the controller as the little cable broke. It's easily repaired as its only fishing wire, I just haven't got around to doing it.

I also have been using a FD6 with the Vistalite (with an edrumin10 and Pearl Mimic Pro) and that's a great hihat set up.

I cannot say what the LTE cymbals are like, but they look virtually the same as the Jokeky/AE Hybrid Low Valume. I do have some Low Volume cymbals but with Drone Halo triggers, but I stopped using them in favour of a VH11. The edge/bow accuracy is just way better.

Hope this helps!

#56

Setup guides and tips / Pintech Hihat Controller LTE C...

Last post by 2BX808 - March 16, 2024, 02:09:21 PM

Hello everyone, I tried searching the forums for this question but nothing much came up.  I'm just wondering has anyone tried the Pintech LTE cymbals with the Drumit3? Dual zone crash, 3 zone ride, and I think dual zone hats. Especially would appreciate info on the hi hat controller.  It is the type with a thin cable out of the bottom that connects to your hi hat foot pedal with a spring, and I assume contains some sort of spring loaded pot. There was no documentation with the cymbals other than how to physically connect the controller to the stand.  Anyway, if anyone has set these cymbals up could you please let me know the basic parameters as I'm sure it will save me hours of time.  Thanks for reading guys!

#57

The DDrum Legacy / Re: Ddrum4ui: Edit the ddrum 4...

Last post by Valdu - March 16, 2024, 09:38:33 AM

Look for new releases and related information here

#58

The DDrum Legacy / Re: Ddrum4ui: Edit the ddrum 4...

Last post by Valdu - March 15, 2024, 04:03:33 PM

New update of ddrum4ui available, using the last release of ddrum4dit.

A small bug was detected in version 1.2 (sample levels in layers), so I encourage you to use version 1.1.3 while waiting for corrections.
This previous version has exactly the same functionalities and is still available on the download page.

#59

DrumIt 3 and DrumIt 5 Software - PC / Mac / Re: 2Box Editor HiHat Sounds F...

Last post by jbowman - March 13, 2024, 02:59:11 PM

Need some help here.  Of the 15 user-assignable sound slots, I see none dedicated for HH splash.  Am I missing something, or did the designers just leave out a slot for that? 

Mimic Pro allocates 4 sound slots for HH I believe. 

#60

General 2box Drumit 5 forum / Re: Compatibilità centralina D...

Last post by Deve Loper - March 13, 2024, 12:51:48 PM

Hi Morillo.
"Maybe I should look for original MK1 first model hardware (orange/black) but I think it will be almost impossible."

I have one for sale. But shipping Stockholm to Italy, dont know how much. At least its within EU.
Pm me if interested.
Deve.