Wanting to know if there is a way to adjust eq settings for just 1 pad within the kit on 2box moduale?I already can change eq controlsfor a complete kit on the moduale . How do i make for example , snare eq different than the rest of the kit i am creating? I amnot using any mixer or other external processers either. Thanks for anyones help with this issue.
from manual , page 38 ... ;)
Select here which signals should be routed to the KIT
-
EQ. The choices are
:
Drum
:
The drum channels are routed individually through the EQ. Turn on the EQ on
the page VOL separately for every channel you want.
Mix
:
The EQ settings are applied to the internal mixer. All drum channels are
automatically routed through the EQ.
Sub
:
The EQ settings are applied to the internal SUB mix and automatically affect all
drum channels that are routed to the sub
-
the rest is here : http://www.2box.se/download/pdf/DrumIt_Five_Manual_1_2x_eng.pdf
Thank you for the info. I already know , and read the pdf manual . My main issue is. I need a step by step instructions for completing the task of changing just the eq sound for the snare. I am blind , and need that extrainfo for exacuting this very simple task to others that dont have trouble seeing the actual screen. I know this is really easy for most people . Sadly that is not the case for me.Shurly someone can just tell me a step by step instructions for changing the eq sound for just the snare . Within a preset kit, and so forth. Sorry for making things more difficult than they should be.
To enable the EQ for certain pieces you need to set KIT-EQ-BUS to "Drum" for the kit, then enable EQ only for the snare.
To set KIT-EQ-BUS to Drum for a kit: KIT, DOWN 4, B3 twice.
To enable the EQ for some pads: KIT, DOWN 3, select a pad and use B2 to toggle the EQ on/off.