hihat calibration

[Evy]

Hey y'all

any chance someone can re-post how to calibrate the hi hat?  Can't seem to find it.

thx!

[Remi]

Look at the 2box site FAQ

www.2box.se

[p929]

http://2box.se/Downloads/DrumIt-User-Manual.pdf


page 11:

HiHat

Before first use, the hihat has to be calibrated on the UNIT-PREF page. If there is a dash below the HIHAT parameter, the hihat is not connected (please make sure a stereo TRS cable is used). A closed hihat symbol will blink if the hihat is not calibrated yet, otherwise press HIHAT to start the calibration. Close the hihat or loosen it and let it rest on the hihat puck. Press HIHAT. An open hihat symbol will be blinking. Open the hihat or fix the hihat at the position where the sound should just reach completely open. Press HIHAT again. Done will appear if an acceptable open to closed range is detected, otherwise NoChg will be shown. One might want to fix the hihat at a position higher than the calibrated open position depending on ones playing preferences.