Recent posts

#1

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by Mik - Today at 06:00:59 AM

Thanks a lot, Ken. This is very helpful. I'll try it out and I will also add an event processor soon.

All the best,
Mikael

#2

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by kenjwright - Today at 01:51:46 AM

Yamaha writes here that the midi note numbers can't be changed in the dtxplorer module.

These two modules may not be a match made in heaven but you can get the basics to match. Although the DrumIt MIDI notes can reassigned, with multiple zones in play  (i.e, snare/rim) the notes must be sequential (snare=31, rim=32, etc). The DTX Kick & Toms are all single zone so settings those to match in the DrumIt will work fine. The Ride should work for bow and edge but the crash will not have the edge.
Using a MIDI event processor in between you can remap any of the notes so that all match but that is an extra expense added to the setup.

Cheers!

Ken

#3

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by Mik - May 16, 2024, 10:27:26 AM

Yamaha writes here that the midi note numbers can't be changed in the dtxplorer module. But that they "all transmit on midi channel 10":

https://faq.yamaha.com/usa/s/article/U0003787

Can't wait to try it out...

#4

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by Mik - May 16, 2024, 10:17:26 AM

Hi Ken

So you're actually telling me that it can be fixed? Very cool. And thank you very much for your reply.

All the best,
Mikael

#5

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by kenjwright - May 15, 2024, 05:12:12 PM

Hi Mik!

I am guessing that the MIDI note numbers are not matching across the two modules. The DrumIt can use multiple notes per channel so likely the defaults in the DTX will not match with the 2Box and need to be adjusted to suit.

Cheers!

Ken

#6

General 2box Drumit 5 forum / Adding pads with a slave modul...

Last post by Mik - May 15, 2024, 08:24:32 AM

I am hoping to be able to use a Yamaha DTXplorer module as a slave module for my 2box drumit5 module (orange version) - from midi out in the DTXplorer to mini in in the 2box.

The usb/midi connection light is blinking and THRU is "on". But the pads connected to the DTXplorer produces no sound on any of the 11 midi channels in the 2box module (the hits on the pads connected to the 2box module does produce a sound). The hits are recognized on the screen of the DTXplorer module, though. So what am I missing?

#7

General 2box Drumit 5 forum / Re: Broken DrumIt 5 Mk I

Last post by welshsteve - May 13, 2024, 03:23:23 PM

I have some of these Push/Pots spare. These are for the drumit5 mk 1. And I mean the control knobs which are rotary and push to select types? You're welcome to them, just cover the shipping. I am based in UK.

Send me a PM if you want them.

#8

General 2box Drumit 5 forum / Re: Discord Server for 2Box

Last post by edcito - May 13, 2024, 09:49:02 AM

I would join your server, but the link was temporary, and now invalid.  Try adding another link that is permanent.

Sorry server is gone, no interest

#9

General 2box Drumit 5 forum / Re: Broken DrumIt 5 Mk I

Last post by Deve Loper - May 13, 2024, 07:53:46 AM

Hi.
Its these
Pec12r-4120-s0012
Pec12r-4220-s0024

The last one as original, 24 steps.
If you like "slower" kit / sound select, use the first, 12 steps.

Best,
Deve.

Ps. I checked on the pec12 pdf, I dont have the original bom at hand, but im pretty sure.

#10

General 2box Drumit 5 forum / Re: Discord Server for 2Box

Last post by JIT - May 12, 2024, 07:22:47 PM

I just created a Discord server to share some videos and tips on how to use your 2box module efficiently, youtube sucks big b**ls so discord is a good alternative to share videos and messages quickly. Join in! https://discord.gg/YxnxjFnt

I would join your server, but the link was temporary, and now invalid.  Try adding another link that is permanent.