Recent posts

#1

General 2box Drumit 5 forum / Re: Discord Server for 2Box

Last post by JIT - Today at 04:46:41 AM

Oh well...it was worth a try.  Thanks for your effort!

#2

General 2box Drumit 5 forum / Re: Broken DrumIt 5 Mk I

Last post by JIT - Today at 04:43:42 AM

WOW!  Wasn't sure if the forum was still monitored or not.  Thanks for the prompt responses.  FYI...I couldn't wait to get this thing checked out, so, the evening I made my post, I decided to dig into the unit.  I pulled it apart, desoldered the broken part, and inspected.  NO PART NUMBER embossed, stamped, or etched.  With my trusty meter, an o-scope, and some time, I tested the broken part in situ. I made the decision to try a part number EC12E2424407 from Alps Alpine, as I needed to place an order with Newark for other needed parts for a VFD I'm currently working on anyway.  The parts arrived a couple days later.  I finally had the time to install and test the new part today.  It works perfectly!  It is definitely not the OEM part, but it works. The "pushbutton" is less stiff than the original, but not a big deal. The detents appear to be ever so slightly more stiff, but again, not an issue. I so appreciate the response, info and offers.  I'll leave this posted here, just in case someone else needs the part, or a suitable sub.  Maybe we can use our collective knowledge of needed repair parts, and the mods can make a sticky...or something.

Again, thanks a million.  Glad to know the forum is still going!

#3

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by Mik - May 17, 2024, 06:00:59 AM

Thanks a lot, Ken. This is very helpful. I'll try it out and I will also add an event processor soon.

All the best,
Mikael

#4

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by kenjwright - May 17, 2024, 01:51:46 AM

Yamaha writes here that the midi note numbers can't be changed in the dtxplorer module.

These two modules may not be a match made in heaven but you can get the basics to match. Although the DrumIt MIDI notes can reassigned, with multiple zones in play  (i.e, snare/rim) the notes must be sequential (snare=31, rim=32, etc). The DTX Kick & Toms are all single zone so settings those to match in the DrumIt will work fine. The Ride should work for bow and edge but the crash will not have the edge.
Using a MIDI event processor in between you can remap any of the notes so that all match but that is an extra expense added to the setup.

Cheers!

Ken

#5

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by Mik - May 16, 2024, 10:27:26 AM

Yamaha writes here that the midi note numbers can't be changed in the dtxplorer module. But that they "all transmit on midi channel 10":

https://faq.yamaha.com/usa/s/article/U0003787

Can't wait to try it out...

#6

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by Mik - May 16, 2024, 10:17:26 AM

Hi Ken

So you're actually telling me that it can be fixed? Very cool. And thank you very much for your reply.

All the best,
Mikael

#7

General 2box Drumit 5 forum / Re: Adding pads with a slave m...

Last post by kenjwright - May 15, 2024, 05:12:12 PM

Hi Mik!

I am guessing that the MIDI note numbers are not matching across the two modules. The DrumIt can use multiple notes per channel so likely the defaults in the DTX will not match with the 2Box and need to be adjusted to suit.

Cheers!

Ken

#8

General 2box Drumit 5 forum / Adding pads with a slave modul...

Last post by Mik - May 15, 2024, 08:24:32 AM

I am hoping to be able to use a Yamaha DTXplorer module as a slave module for my 2box drumit5 module (orange version) - from midi out in the DTXplorer to mini in in the 2box.

The usb/midi connection light is blinking and THRU is "on". But the pads connected to the DTXplorer produces no sound on any of the 11 midi channels in the 2box module (the hits on the pads connected to the 2box module does produce a sound). The hits are recognized on the screen of the DTXplorer module, though. So what am I missing?

#9

General 2box Drumit 5 forum / Re: Broken DrumIt 5 Mk I

Last post by welshsteve - May 13, 2024, 03:23:23 PM

I have some of these Push/Pots spare. These are for the drumit5 mk 1. And I mean the control knobs which are rotary and push to select types? You're welcome to them, just cover the shipping. I am based in UK.

Send me a PM if you want them.

#10

General 2box Drumit 5 forum / Re: Discord Server for 2Box

Last post by edcito - May 13, 2024, 09:49:02 AM

I would join your server, but the link was temporary, and now invalid.  Try adding another link that is permanent.

Sorry server is gone, no interest