Author Topic: Agean Cymbals Silent R-Series Low Noise Cymbals Pack Box Set (14HH/16CR/20R)  (Read 508 times)

paolob

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Hi guys. Has anyone already had the chance to mount these Low Noise Cymbals on Drumit 5?
How can they be mounted to replace the originals and need a converter?

https://www.youtube.com/watch?v=tlRejKlr6wY

welshsteve

  • Sr. Member
  • ****
  • Posts: 488
  • Karma: 14
    • View Profile
If you’re talking about just putting them on the 2box hardware, there shouldn’t be any problem at all.

paolob

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Yes, I meant to install on the 2Box Drumit 5.
Can they be mounted directly in place of the originals or do you need a converter?

Stoked2

  • Newbie
  • *
  • Posts: 34
  • Karma: -2
    • View Profile
If you are asking  if they can be
played Thru the module?. No. they need triggers and cables. If you are asking if they can be mounted to 2 box original equipment cymbal arms, I would believe no problem is that answer. Please clarify

paolob

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Yes, my question is if I can replace the original ones I have right now, by mounting this series.
Then using the supports and cables that are already part of the original set, without other accessories.

welshsteve

  • Sr. Member
  • ****
  • Posts: 488
  • Karma: 14
    • View Profile
Okay, you said "use supports and cables" Sounds like you want to trigger these cymbals. So having the look of real cymbal but using the cymbal sounds in the module.

Is that what you're asking?

paolob

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Yes exactly that

1781cc

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Following this as I have just gone L80 all round on the 2box hardware

paolob

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Thank you for your answer.
Can you leave me the link where I can follow what you told me?
Thank you

welshsteve

  • Sr. Member
  • ****
  • Posts: 488
  • Karma: 14
    • View Profile
Okay so you want to trigger Low volume cymbals using the drumit5 cymbal sounds.

You will need to dampen the cymbals and put a trigger on them. Ride/crash cymbals is one set of issues but hihats you're gonna have a bit of a nightmare.

Magnatrack triggers seem the best solution of for rides/crashes/china/splashes, you will have zone and choke issues though.

With a drumit5 you will have to choose a zone, so with crash it most likely "bow"

I am not sure if you can have choke, but perhaps someone with more knowledge can chime in with a firm answer.

The hihat... I am also not 100% but you will most likely need 2 things, a controller (Go edrum for example) and the Zumman box. And also, will have to only have one zone, Bow being the most likely.

Then you'll have the FUN of setting the triggering right for your playing!