Author Topic: Trigger settings for trigit  (Read 196 times)

EmilNyg

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Trigger settings for trigit
« on: January 05, 2019, 08:02:34 PM »
Hey! This have probably been asked before and if that's the case then just link it. (could not find anything)

I own a 2box module and use the trigit triggers with silent stroke heads(mainly the snare). The response is a little of, the soft hits don't register and If I turn up the gain it double triggers. I've tried with mask as well but can't get it to work.

If anyone have a simular setup I would be really thankfull if anyone could give some advice.
Thanks in advance

Best regards Emil

ANGR77

  • Sr. Member
  • ****
  • Posts: 378
  • Karma: 25
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: Trigger settings for trigit
« Reply #1 on: January 05, 2019, 08:40:33 PM »
Hi!

I am using Silent Stroke with Roland RT-10S...works great on both DI5 and DI3.

What kind of settings are You using on your module for the trigit?

Best regards

Anders / www.zourman.com
Sonor Force Stage 2007 + Safari, Quartz Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, KT-10, CY-12/14C/13R/15R, MegaDRUM, 2Box 5 & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com

welshsteve

  • Sr. Member
  • ****
  • Posts: 447
  • Karma: 10
    • View Profile
Re: Trigger settings for trigit
« Reply #2 on: January 06, 2019, 01:55:51 AM »
I had double triggering with a silent stroke and a drumit5. So I raised the mask time, no double triggering.

But...

It didn't catch flams and really fast press rolls. The simplest solution? get some foam to line the inside of the shell, about 1.5 inches thick all the way around. I did, lowered the mask time and threshold and it was great after!!

EmilNyg

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Re: Trigger settings for trigit
« Reply #3 on: January 06, 2019, 10:02:29 AM »
I had double triggering with a silent stroke and a drumit5. So I raised the mask time, no double triggering.

But...

It didn't catch flams and really fast press rolls. The simplest solution? get some foam to line the inside of the shell, about 1.5 inches thick all the way around. I did, lowered the mask time and threshold and it was great after!!
I will have to try that, thanks alot!

EmilNyg

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Re: Trigger settings for trigit
« Reply #4 on: January 06, 2019, 10:05:13 AM »
Hi!

I am using Silent Stroke with Roland RT-10S...works great on both DI5 and DI3.

What kind of settings are You using on your module for the trigit?

Best regards

Anders / www.zourman.com
Type actr3

Xtlak medium

Level

Gain 20

Threshold -30

Curve neg1

Mask 3

Thanks fpr the fast reply!

ANGR77

  • Sr. Member
  • ****
  • Posts: 378
  • Karma: 25
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: Trigger settings for trigit
« Reply #5 on: January 07, 2019, 05:41:47 AM »
Hmm...AcTR3 is for large drums...kicks...

I would have chosen the following settings for a snare:

Actr1, xtalk off, gain 8, thres: -44, curve pos1, mask 2, Lxtr vhigh

Best regards

Anders / www.zourman.com
Sonor Force Stage 2007 + Safari, Quartz Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, KT-10, CY-12/14C/13R/15R, MegaDRUM, 2Box 5 & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com

EmilNyg

  • Newbie
  • *
  • Posts: 5
  • Karma: 0
    • View Profile
Re: Trigger settings for trigit
« Reply #6 on: January 07, 2019, 01:37:45 PM »
Hmm...AcTR3 is for large drums...kicks...

I would have chosen the following settings for a snare:

Actr1, xtalk off, gain 8, thres: -44, curve pos1, mask 2, Lxtr vhigh

Best regards

Anders / www.zourman.com

Thanks alot! That really helped! I'm still not happy with the toms, do you use simular settings on those?

ANGR77

  • Sr. Member
  • ****
  • Posts: 378
  • Karma: 25
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: Trigger settings for trigit
« Reply #7 on: January 11, 2019, 09:01:11 PM »
For smaller Toms: actr1, xtalk off, gain 4, Norm, Three -36, LXTR vHigh
Bigger Toms actr2, xtalk off, gain 4, norm, -36, LXTR vHigh

Best regards

Anders / www.zourman.com
Sonor Force Stage 2007 + Safari, Quartz Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, KT-10, CY-12/14C/13R/15R, MegaDRUM, 2Box 5 & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com