Author Topic: Trigger signal processing  (Read 174 times)

TrommelTheo

  • Full Member
  • ***
  • Posts: 119
  • Karma: 1
    • View Profile
Trigger signal processing
« on: December 30, 2018, 06:48:17 PM »
Hello everybody,

I'm thinking of getting a Drumit 3. Now I have heard from my favorite e-drum dealer that there are still problems with the trigger settings of the various pads (dirty processing, double triggers etc.). 2Box knows about it and is working on a solution, but my dealer has not heard anything, whether it works now or not. What is your experience with it?

Greetings

Theo

welshsteve

  • Sr. Member
  • ****
  • Posts: 447
  • Karma: 10
    • View Profile
Re: Trigger signal processing
« Reply #1 on: December 31, 2018, 12:56:26 AM »
What will you be plugging into it, by which I mean pads. I haven't heard anting about dirty triggering. Most issues are solved with setting adjustments!

TrommelTheo

  • Full Member
  • ***
  • Posts: 119
  • Karma: 1
    • View Profile
Re: Trigger signal processing
« Reply #2 on: January 03, 2019, 02:43:53 PM »
Theme solved after a very good phone-call with Thomas Panthel from Hyperactiv! :patbat2box:

Thanks a lot, Tom! :rock:

Theo

ANGR77

  • Sr. Member
  • ****
  • Posts: 379
  • Karma: 25
  • 2Box, have got my hands on unit 211
    • View Profile
    • Zourman.com
Re: Trigger signal processing
« Reply #3 on: January 03, 2019, 07:25:56 PM »
And what did hyperactive say?...

Anders / www.zourman.com
Sonor Force Stage 2007 + Safari, Quartz Triggers, Roland & Triggera, 2box Cymbals & HH, RT-10, KT-10, BT-1, VH-11/12/13, KT-10, CY-12/14C/13R/15R, MegaDRUM, 2Box 5 & 3, DD4SE, Pearl ButtKicker Addictive Drums 2.1.7, all ADPaks moved to 2box(SDSE) Zourman Conversion Gears www.zourman.com

TrommelTheo

  • Full Member
  • ***
  • Posts: 119
  • Karma: 1
    • View Profile
Re: Trigger signal processing
« Reply #4 on: January 04, 2019, 11:11:11 PM »
my favorite E-Drum Dealer meant the splitting from head and rim for using a different sound like a cowbell,
an attitude, i would not need.

Greets

Theo

Jman

  • Administrator
  • Hero Member
  • *****
  • Posts: 1906
  • Karma: 110
  • D5 modules SN: 00197 and 02207 D3 module SN 00009
    • View Profile
    • Stealth Drums
Re: Trigger signal processing
« Reply #5 on: January 04, 2019, 11:29:47 PM »
Sounds like an imaginary problem to me. I have found the Head and Rim on any pad I used triggered great, separation is better on the D3 than previous OS 1.30 for sure. And no problem splitting head and rim with splitters as far as I know. That is the first thing I do. I have all 4 tom inputs split and working just fine on the D3???? The only thing I have seen recently is one user saying they were getting a bit of problem on a Yamaha 3 zone where the Bell sound would sometimes trigger from the Edge .... I haven't tested any 3 zone Yamaha cymbals though personally.
« Last Edit: January 04, 2019, 11:36:00 PM by Jman »
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/