News:

2box forum: accident-free since the last one.

Main Menu

Factory reset

Started by InTheBox, November 20, 2014, 08:08:12 PM

Previous topic - Next topic

CrsMyHrt

Quote from: JRage on January 09, 2017, 01:54:39 PM
Hi,
Try different software for unzipping. I had the same problem  ;)

BR,
JRage

:rock: :rock: :rock:

Pret

Reviving an old topic...a bit of frustration...
In my used module trying to get amazed by those wonderful acoustis-like sounds as I hear in all online module demos..
However, the current kits produce sounds that somehow do not match those...

I'd like to start with fresh factory setup to dismiss any possible personal adaptations that probably did the previous owner.
As described here in the thread (and in the manual), proceeded Factory Defaults Reset procedure, going to UNIT -> PREF, enabling the SAVE and then INIT ALL. The response was NoCng which means no changes have been made.

I'm willing just to delete all the kits and any user-specific changes and reload the module with fresh factory default kit (100 kits file) and settings.
Went to 2box website to download page, cannot figure there the necessary files for download (presumably DrumIt.dkit).
Any help with that ? Did they remove it form the download page ?

Another question, how to dismiss any possible user sound-alternation setting the previous owner might have applied in the module ? Just to make sure the sound to be played the original default way..

Thanks in advance

Pret

Just to clarify
Module's OS version is 1.30.3
Boot 1.32

welshsteve

That's the lastest firmware. There might be some missing files as on the factory initialisation, sounds are no longer available (for various reasons)
If you send me an email, to stephenmackrill@gmail.com, I can send you any files you might be missing (I think I have them all anyway) But beware, all of them in total are too large for the module's 4gb size, unless you have sone the 32gig modification.
My Hovercraft is full of Eels!

Jman

#19
All the sound files are still up and the link is in my post earlier in the  thread. If you put those sounds on the module and install the current .dkit from the 2box site and latest OS files you have the latest module.This was already detailed earlier in this thread. And actually has been discussed numerous times on the forum.
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

Pret

Thanks Steve, email has been sent

Jman

#21
Well, for future readers of this thread, so they don't get confused, as I mentioned earlier and posted earlier in the thread all the newest sounds that come installed on and OS files, etc. for the latest stock module are still at this link:
http://www.hyperactive.de/support/2box

Plus additional new sounds that do not come on the module are at the regular 2Box Site. Both sites include the new OS and Drumit Editor, but only the Hyperactive site (the link above) has all the Drumit stock module sounds.
http://www.2box.se/US/pages/downloads/
I could tell you where to stick that piezo! :D ;)
http://stealthdrums.com/

welshsteve

I CANNOT stress enough the best relatively small money you will ever spend on drumit5 will be the 32gig modification which Jman here can help you out with!!  ;)
My Hovercraft is full of Eels!