News:

2box forum: accident-free since the last one.

Main Menu

2box/SDSE system/tip

Started by Deacon Daniell, January 28, 2014, 03:51:52 PM

Previous topic - Next topic

Deacon Daniell

Quote from: Lustar on January 30, 2014, 10:29:54 PM
It could even be done on one module using only a single input, by losing the tom rims.

You would need two stereo breakout cables, the same kind used to split tom Inputs on the module to use the tom rims to add more cymbals:

Hosa YPP-117, 1/4 stereo male to separate 1/4 female tip/ring.

and one mono splitter:

Hosa YPP-111, 1/4 stereo male to 2x 1/4 female mono.

To do the room trick with a single tom input, losing the rim:
- Plug a stereo breakout cable on the Tom input, Hosa YPP-117 or similar.
- Plug the other stereo breakout cable on the pad, Hosa YPP-117 or similar.
- Plug the mono splitter in one of the breakout outputs from the pad (red for head), Hosa YPP-111 or similar.
- Use a mono cable from one of the mono splitter outputs from the pad to the breakout input on the module that will be used for the normal .dsnd without room.
- Use a mono cable from the other mono splitter output from the pad to the other breakout intput on the module that will be the room .dsnd


For the snare, a slightly different way could be used to be able to keep the snare rim, by using another input on the module.

You would need the same two YPP-117 stereo breakout cables as above, and one stereo splitter:

Hosa YPP-118, 1/4 stereo male to 2x 1/4 stereo female.

To do the room trick for the snare and keep the rim by using another module input for the room:
- Plug the stereo splitter on the pad, Hosa YPP-118 or similar.
- Plug a stereo breakout cable on the module input that will be used for the room .dsnd
- In one of the YPP-118 outputs plug a stereo cable that goes to the Snare Input on the module.
- In the other YPP-118 output plug a stereo breakout cable, Hosa YPP-117 or similar.
- Use a mono cable from one of the stereo breakout outputs (red for head) from the pad to the stereo breakout cable plugged in the module input you will use for the room .dsnd




Can I use this set up with aquarian on head pads?

Lustar

I don't know about those, but with the right adapter cables there's no reason it wouldn't work. Disclaimer: I have not done it myself, that post was just meant to show the kind of adapters one would need :)