Author Topic: New 2box hihat issue  (Read 1979 times)

Xenu

  • Newbie
  • *
  • Posts: 18
  • Karma: 0
    • View Profile
New 2box hihat issue
« on: February 22, 2013, 01:13:26 AM »
Hi guys,

Just received my new module and hihat and have found a strange issue with the hihat.

With the hihat closed, If I hit the edge of the hihat, subsequent bow hits trigger the edge sound.  If I then open the hihat and close it again then bow hits trigger fine until I hit the edge?

So it seems that it isn't the switch being continually engaged but perhaps a software bug or even worse a hihat controller board issue?  Granted I didn't calibrate the hats - they seemed to work well enough out of the box.  I'll try a calibration tonight but was hoping someone might be able to shed some light on the issue.

tower of p

  • Full Member
  • ***
  • Posts: 122
  • Karma: 6
  • S/N 3580
    • View Profile
    • Gebruder Grim
Re: New 2box hihat issue
« Reply #1 on: February 22, 2013, 01:47:13 AM »
Hi Xenu,
calibrating the hihat ist the 1st thing you should do, just have a look into the guide.

cheerio,
top

Xenu

  • Newbie
  • *
  • Posts: 18
  • Karma: 0
    • View Profile
Re: New 2box hihat issue
« Reply #2 on: March 02, 2013, 11:21:25 PM »
Calibrating fixed the issue. Cheers