Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Deve Loper

Pages: [1] 2 3 ... 10
Hi. Sie schreiben in ihrem dritten eintrag...
" als mp3 abgespeichert und dann umgewandelt in eine wav datei"
So dass war kein wav...?

Hi. Floating point ist eine alternativ sample speicher format.
Die geht nicht in DI5 editor. Die meiste linear wav geht doch.
Können sie deine wav abspielen mitt eine anderes program?
Dort können sie viellicht das wav format info bekommen.
GruBe, Deve.

Vielleicht ein floating point wav datei?

DrumIt 5 Hardware / Re: 2box module undusting?
« on: March 02, 2019, 09:07:25 AM »
... plus 2 metal brackets.
Btw, I think the PEC11R is a better encoder. They have the same footprint so just check rhe right length of the shaft.

DrumIt 5 Hardware / Re: 2box module undusting?
« on: March 02, 2019, 09:00:09 AM »
Hi. Yes thats the right encoder. Its a pretty closed housing so I guess spray wont get in.
Probably best to replace them. You can pretty easily clip all 5 metal pins so you can solder away each pin by itself.
Best of luck, Deve.

DrumIt 5 Hardware / Re: 2box module undusting?
« on: February 28, 2019, 07:00:31 AM »
Hi. It's the encoder being worn out. They should give a nice gray code but states will flip at random.
Opening up the unit and spray them inside might help. Orherwise best to replace.
The one used is the PEC12R 4220F S0024.
But the 4120F S0012 might be safer as it has only 12 pulses per rev so each gray "stretch" is double as long. But it takes also twice as much rotating to change a value.
Regards, Deve.

The DDrum Legacy / Re: loading sounds into drum from mac
« on: February 16, 2019, 05:06:04 PM »
Hi Dave. Just use any mac midi sysex dump utility.
The ddrum4 .mid files are std sysex files.
Make sure there is space first in rhe dd4 mem.
How to do that google for the manaul.
Best, Deve.

Hi. Easiest to judge the sound quality on DI3 and DI5 by using a cd quality wav file (ripped) and play it as a song. It should sound the same on DI5 DI3 or any other good DAC connected to PC or Mac.
Listen to line out 1 2 to exclude any headphone coloring.
Best, Deve.

" Foot Splash WAVS is all you need. The 2Box does the foot chick internally using the closed HH sound."
Actually it's the foot splash with fast decay. Reasoning: when the 2 plates meet, there is no difference in chick or splash. Not known yet when or if it opens.
So same attack sound but when held closed it decays fast.
When opened again the decay is removed so it rings out with whatever energy is left.
Cheers, Deve.

Deutsch / Re: 2 Box Line in Signal zu leise
« on: October 29, 2018, 03:23:54 PM »
Hi Stefan.

Ab werk ist die line in volume null.
Sie sehen dass volume im Unit mode am Mix page.
Die buchstabe L bezeichnet die Line In.
Höhen sie dass und man sollte etws hören.
Dass max nivo können sie am VU page sehen.
Die eingang hast keine eigenis hardware volume kontrol,
so setzen sie das apparat der audio skickt zu einem volume
da die DrumIt VU nicht zu höch bekommt.
Deve Loper.
Ps. Mein Deutsch ist ein bischen shaky... :-)

Hi Paul.
You are right. No date/time update because there is no real time clock.
At the time, I didn't think it important enough because it needs a little battery.
An extra cost and we don't need even more batteries around.
A fix for that could be to just bump the date/time a minute so it is at least different.
Will do so for my next module.
Best, Deve.

Hi. There are 4 resistors for each hp channel. 2 in parallel and then 2 pairs in series. Each res is 100 ohm so in total also 100 ohm. Replace these 4 with something like 10 ohm 1/4 W.
They are located just above the level pot. Each marked with 1000 (100 x 10^0).
You see by the traces how they are connected.
Good luck, Deve
Ps. warranty void of course...

General 2Box Drumit 3 Forum / Re: Yamaha RHH 135 with Drumit 3
« on: June 12, 2018, 06:33:31 AM »
Hi. RHH135 and HH65 have 5 positions.
But the various resister steps are not equal.
Also there is an extra resistor from the tip.
I never really understood why it is lke that.
Regards, Deve.

General 2box Drumit 5 forum / Re: Kit Load time??
« on: April 21, 2018, 10:03:52 AM »
Well at least I can tell you that I'm -not- working on a hint or a kit :-)
So yeah...

General 2box Drumit 5 forum / Re: Kit Load time??
« on: April 18, 2018, 06:11:39 PM »
Thanks. That was (and is) one of the major advantages of the sound engine I developed.  Good to know it is appreciated...!

Pages: [1] 2 3 ... 10