unofficial 2box forum

2Box Drumit 5 Forum => General 2Box Drumit 3 Forum => Topic started by: Krillo on March 15, 2019, 05:05:21 AM

Title: Alesis Strike 16" cymbal
Post by: Krillo on March 15, 2019, 05:05:21 AM
Hi all

Is the Alesis Strike cymbals compatible with the drumit3? I intend to use it a 3-zone ride.
Thx
Title: Re: Alesis Strike 16" cymbal
Post by: ANGR77 on March 15, 2019, 05:13:13 AM
Hi!

I am afraid i cant find it on the DI3 compability list. Does it have 3 zones? Is it piezo on bow and the edge and bell are switches...then it will probably work.

Best regards

Anders / www.zourman.com
Title: Re: Alesis Strike 16" cymbal
Post by: Krillo on March 15, 2019, 05:48:16 AM
God morgon, Anders ☺

We made the same conclusion - it's not on the compatibility list (which needs updating), and like you, I don't know how the Alesis Strike cymbals are constructed. Hoping someone on here know or have tried them with the drumit3.
Title: Re: Alesis Strike 16" cymbal
Post by: ANGR77 on March 15, 2019, 06:25:57 AM
It looks like people have got descent results with the strike 3 zone and Roland modules...and drum-tec says it is Roland 3 way compatible...(it is then a piezo, switch, switch implementation)

So it looks like on paper that it will work fine on DI3. :-)

Best regards

Anders / www.zourman.com
Title: Re: Alesis Strike 16" cymbal
Post by: Krillo on March 15, 2019, 06:37:17 AM
It looks like people have got descent results with the strike 3 zone and Roland modules...and drum-tec says it is Roland 3 way compatible...(it is then a piezo, switch, switch implementation)

So it looks like on paper that it will work fine on DI3. :-)

Best regards

Anders / www.zourman.com

Awesome! Thanks for your help!
Title: Re: Alesis Strike 16" cymbal
Post by: Rmiller on March 15, 2019, 07:56:34 PM
I have the Alesis 16” 3 zone (2 plug ins) and it works fine with the drumit3. The only issue I had was the different sound levels between the zones. I used the Lustark software to balance them the way I wanted and now work great.
Title: Re: Alesis Strike 16" cymbal
Post by: Krillo on March 16, 2019, 05:20:22 AM
I have the Alesis 16” 3 zone (2 plug ins) and it works fine with the drumit3. The only issue I had was the different sound levels between the zones. I used the Lustark software to balance them the way I wanted and now work great.

Good info, thanks!