Print Page - Will this cymbal holder fit the 2Box rack?

Title: Will this cymbal holder fit the 2Box rack?
Post by: Haggis-man on January 26, 2012, 08:27:40 AM

Hi Guys,

I'm thinking of buying a Millenium cymbal and this cymbal holder from Thomann - http://www.thomann.de/gb/millenium_mps300_becken_halte_arm.htm
(http://www.thomann.de/gb/millenium_mps300_becken_halte_arm.htm) Will this fit the 2Box rack?

I emailed Thomann first but have had no reply.

Thanks!

Title: Re: Will this cymbal holder fit the 2Box rack?
Post by: Jman on January 27, 2012, 01:28:49 AM

I'm sure it is made for a standard rack tube 1 1/2" .... and that is what 2Box is .... Looks like a pretty flimsy clamp and cymbal mount though ... If it were me I would go a little better quality.

Title: Re: Will this cymbal holder fit the 2Box rack?
Post by: Haggis-man on January 27, 2012, 07:59:01 AM

Thanks Jman, they do look a little flimsy but they'd only be used for the occasional splash and china hit.

Title: Re: Will this cymbal holder fit the 2Box rack?
Post by: signature on February 01, 2012, 06:10:30 AM

Good questions - actually does anyone have any recommendations in terms of commonly availbale hardware (clamp and arms) that will mount a 2box 10" tom, and (sepeartely) a 2box cymbal, on the Mk II Rack. I am thinking Gibraltar, or Pearl, or other more commonly available fittings. Has anyone have photos?

Title: Re: Will this cymbal holder fit the 2Box rack?
Post by: reekster on April 05, 2012, 09:37:41 PM

I'll try an ultimate support clamp, I have a lot but I don't know if they are being made any longer. I'd like to see some sort of adapter to mount the DrumIt Five pads on different hardware.

unofficial 2box forum

2Box Drumit 5 Forum => DrumIt 5 Hardware => Topic started by: Haggis-man on January 26, 2012, 08:27:40 AM