Author Topic: Recommended Cards for DIY DrumIt - any suggestions?  (Read 193 times)

trommler_tom

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Recommended Cards for DIY DrumIt - any suggestions?
« on: May 13, 2019, 10:53:24 AM »
Hi there...
I would like to "update" my DrumIt Three and use 32GB cards instead of 4 GB only.
I've heard that not all cards are working properly.
Does anybody has experience with 32 GB cards on DrumIt Three or old DrumIT Five and can recommend some cards to me?
Thanks!
Tom

1781cc

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Re: Recommended Cards for DIY DrumIt - any suggestions?
« Reply #1 on: May 13, 2019, 12:30:03 PM »
I just did this upgrade myself with a cheap SD extension cable of Ebay and a 32GB Class 10 SD card - everything works fine, except IO haven't solved my "save" issue, whereby I edit a kit on the 2Box and press the save button, nothing happens... which means I am having to take the card out and use external software to do it, then put the card in.

I followed the guide on here to unscrew and do the mod, super simple, worked first time

edtc

  • Hero Member
  • *****
  • Posts: 1160
  • Karma: 50
  • 2-Box S/N 01155
    • View Profile
Re: Recommended Cards for DIY DrumIt - any suggestions?
« Reply #2 on: May 13, 2019, 03:58:40 PM »
you have to enable "save" in the module's preferences ...

1781cc

  • Newbie
  • *
  • Posts: 15
  • Karma: 0
    • View Profile
Re: Recommended Cards for DIY DrumIt - any suggestions?
« Reply #3 on: May 15, 2019, 06:21:58 AM »
you have to enable "save" in the module's preferences ...

It used to save before, I didn't change anything which is weird, I'll have a look through that.

trommler_tom

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
    • View Profile
Re: Recommended Cards for DIY DrumIt - any suggestions?
« Reply #4 on: May 17, 2019, 01:16:50 PM »
I just did this upgrade myself with a cheap SD extension cable of Ebay and a 32GB Class 10 SD card - everything works fine, except IO haven't solved my "save" issue, whereby I edit a kit on the 2Box and press the save button, nothing happens... which means I am having to take the card out and use external software to do it, then put the card in.

I followed the guide on here to unscrew and do the mod, super simple, worked first time
Can you please let me know the brand of the card and specific name?

Didn't you had any issues by using this card?
Best Tom